Advertisement
Quick Links
Thank you for your purchase of HKS DMR (Drive Multi Recorder).
This manual indicates items that require attention in order to install this product safely and lists precautions
to avoid any possible damage and/or accidents.
●HKS DMR is a device to record and view images to make drivers more aware of safe driving and accident
prevention.
●This product does not guarantee to record all images involved in an accident. Also, the sensor may not
record any image if the impact is too small.
●Do not use any recorded images for improper purposes. Recorded images may contain scenes which
constitute an invasion of privacy. HKS will not be responsible for any case caused by improper use of the
image recorded by this product.
●HKS will not be responsible for any damage caused by incorrect installation and/or use of this product.
●HKS will not be responsible for any causalities and/or property damage caused by an accident. Also, HKS
will not be responsible for any damage or loss of data caused by incorrect use and/or malfunction of this
product.
●HKS will not be responsible for the expense of the production installation and/or removal and the loss
caused by the period the vehicle cannot be used.
●The specifications of this product are subject to be changed without notice.
●This manual may contain information which is different from the actual product since it was prepared
ahead of the product release.
●This manual is subject to be revised without notice.
1
WARNING
CAUTION
SD MEMORY CARD PRECAUTIONS
GPS
PRODUCT INTRODUCTION
NAME AND FUNCTION
PRODUCT STRUCTURE
INSTALLATION OF VIEWER SOFTWARE
PRODUCT SPECIFICATIONS
TROUBLESHOOTING
3
6
8
11
14
17
19
21
22
30
33
43
46
49
51
2
Advertisement
Summary of Contents for HKS DMR-150D
-
Page 1: Table Of Contents
This manual indicates items that require attention in order to install this product safely and lists precautions to avoid any possible damage and/or accidents. WARNING ●HKS DMR is a device to record and view images to make drivers more aware of safe driving and accident CAUTION prevention. -
Page 2: Package Contents
10. A v oid foreign objects from entering to the product. Use of inapplicable components may cause damage to the product or accident. HKS will not be Failure to do so may result in a fire, electric shock, and/or product damage. - Page 3 If the signal was not recorded, de- termine from the situation/circumstances using images before and after. HKS will not be responsible for any incident caused by the fact that the LED signals cannot be recorded. 6. Check the recorded images on a regular basis.
- Page 4 1. GPS shows a position where it is at least 15m different from the correct position. Due to the characteristics of radio waves, the GPS may show more than 100m difference or be out of range depending on weather and/or circumstances. 2.
-
Page 5: Product Features
This product can obtain information in road traffic accidents. Having a It's also possible to place a comment. recording of the moment can be very useful in clarifying the situation. HKS DMR can assist safe driving. 6. Recreating the driving route ◆PRODUCT FEATURES... - Page 6 DMR MAIN UNIT SECOND CAMERA Fitting Bracket Lens Power/AV Connector Screw (S) CONSTANT POWER SUPPLY UNIT Name Function GPS Module Receive the GPS signals. Screw Fix and adjust the installation angle. AV OUT Port Output the viewer mode. Fuse Multi Button Operate the view mode.
-
Page 7: Installation
1. Insert the DMR main unit to the provided Fitting Bracket, and 4.Determine the installation position. Make sure the camera lens Screw (L) secure the unit using the provided large Screws. face forward, and the unit does not distract driving. Clean the mounting surface. - Page 8 INSTALLATION OF SECOND CAMERA If a glass antenna for AM radio is mounted on a glass, make sure to maintain at least 20cm distance between the Second camera and the antenna. Failure to do so may The DMR main unit can be used without the Second Camera. To use the DMR without the cause poor reception.
-
Page 9: Installation Of Constant Power Supply Unit
INSTALLATION OF CONSTANT POWER SUPPLY UNIT 6. Connect to Power Supply Line 1. Make sure the cable and the Constant Power Supply Unit are in proper condition for installa- Connect the red wire from the Constant Power Supply Unit to tion. - Page 10 4.Stop Recording 2) Shock Sensing Mode When shock/impact is detected over the preset level, the image can be recorded a set time before Stop driving, and shut off the engine. The recorded images are saved in a few second. and after. This time can be set as either 10 seconds or 15 seconds under "1Channel" setting The unit beeps 3 times (When beeping sound is set to on.) and ends recording.
- Page 11 HOW TO USE THE VIEWER MODE OPERATION & FUNCTIONS OF MULTI BUTTON Functions Connecting this product to an external monitor equipped with an AV input terminal can play the recorded Button Operation images or images in real time on the monitor. Also, setup using a monitor is possible. Real-time Monitoring Playing the recorded images Setting Change −...
- Page 12 1.Connecting to the PC Turn off the DMR main unit, and eject the SD memory card from the DMR main unit after all LED go out, and insert the memory card to the USB card reader connected to the PC. A USB card reader is not included to this product;...
- Page 13 DMR Main Unit Second Camera Second Camera 0.27M Pixel Color CCD Sensor 130° (monochrome at dark places) Main Camera 1.3M Pixel CMOS Digital Sensor 142.5° 1.3Mega (Input 1280x960, Output 640x480) Power Source DC12V Negative Ground Record Resolution or VGA (Input 640x480, Output 640x480) Operating Temperature -10℃∼60℃...
-
Page 14: Maintenance
Proper maintenance of this product is necessary in order to maintain the safety, reliability, and function of this product. ● Maintenance is the responsibility of the driver/owner. ● If work needs to be performed outside the scope of this manual, consult a professional. ●...
Need help?
Do you have a question about the DMR-150D and is the answer not in the manual?
Questions and answers