Quick Start Guide
NX10/20 & SX10 Series DVRs
Getting Started
1. Getting Started
This Quick Start Guide explains the installation
involved with your DVR. For additional information or
support, contact a customer service representative.
2. Unpacking the Contents
The following should be included with the DVR. Please
inspect these and the DVR while unpacking.
Quick Start Guide
•
Mouse/Keyboard
•
Video Input Cables (NX10/NX20 only)
•
PTZ Control Cable (NX10/NX20 only)
•
RS232 PTZ Control Cable (NX10/NX20 only)
•
Recovery DVD
•
Application CD
•
Nero CD
•
Surge Protection Notice
•
Power Cord
•
3. Choose a Proper Location
Select a location for the DVR that meets the following
requirements. Notice: Excessive heat can shorten the
life of electronics.
Adequate ventilation to avoid excessive heat
•
Uninterrupted Power Supply (UPS)
•
Moisture-free environment
•
A place away from direct sunlight
•
An area with minimal dust or debris
•
4. Site Installation
Hardware Setup – Connect all input devices and
external peripherals to the DVR. Please refer to the
diagrams in regard to what should be connected to
your DVR.
Indoor & Outdoor Camera(s)
•
VGA Monitor
•
Spot Monitor Out - Optional (NX10/NX20 only)
•
PTZ Camera(s) - Optional
•
Audio in - Optional
•
Speakers - Optional
•
Ethernet
•
Mouse
•
Keyboard
•
Relays and I/O - Optional (NX10/NX20 only)
•
Cash Register (RS 232) - Optional
•
Power Cord
•
Notice: For proper indoor and outdoor cameras an in-
line surge suppressor or equivalent should be used to
reduce exposure to surges and lightning strikes.
For order assistance, questions and inquiries, please contact one of our sales consultants at: 1-877-5SC-BLACK or
through email at sales@sc-black.com, or please feel free to browse our website at www.sc-black.com.
SC Black is a registered trademark of Supercircuits. Copyright © 2008 Supercircuits, Inc. All rights reserved. www.sc-black.com