Important Notes For Recording - Panasonic DMR-EZ47V Operating Instructions Manual

Important notes for recording

Selecting Audio
Broadcast in multi-channel sound (Digital broadcast
only):
for Recording
You can select the audio language when receiving audio in
multi channel broadcast ["Multi Audio" appears at the
bottom of digital channel information display (➡ 21)].
However, audio cannot be switched after recording.
Bilingual broadcasts (Analogue broadcast only):
[RAM] [VHS]
Both main and secondary audio can be recorded.
You can change the audio during playback.
(➡ 34, Changing audio during play)
However in the following cases, select whether to record
the main or secondary audio:
–Recording sound in LPCM (➡ 64, Audio Mode for XP
Recording)
M 1
Hello
[RAM] [-R] [-R]DL] [-RW‹V›]
About the aspect
≥If "Aspect for Recording" in the Setup menu is set to
when recording a
"Automatic" (The default setting is "Automatic" ➡ 63), the
programme
programme will be recorded in the original aspect used
when recording started (including when recording started
at a commercial, etc.). If recorded with a different aspect,
select the correct aspect ("16:9" or "4:3").
However, in the following case, programme will be
recorded in 4:3.
[-R] [-R]DL] [-RW‹V›]
Programme recorded using "EP" or "FR (recordings 5 hours
or longer)" recording modes will be recorded in 4:3 aspect.
[VHS]
The original aspect used for the source programme will
also be used with the recording.
When recording It is not possible to record the broadcasts that allow "One time only recording" onto DVD-R, DVD-R DL, DVD-RW, +R,
+R DL, +RW or 8 cm DVD-RAM discs. Use the CPRM (➡ 80) compatible DVD-RAM.
the "One time only
recording"
[RAM] CPRM compatible discs only.
broadcasts
≥Even when copying to videotape the title may not be copied correctly because of the copy guard.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
Playing the disc
The disc must be finalised after recording or copying (➡ 59).
on other DVD
It is necessary to finalise DVD-R, etc. on this unit after recording or copying titles to them. You can then play them as a
players
commercially sold DVD-Video. However, the discs become play-only and you can no longer record or copy.
§
You can record and copy again if you format DVD-RW.
Recording to DVD- DVD-R DL and +R DL discs have two layers of recording surface on one side.
≥It is not possible to record continuously from the first layer to the second layer. Recording stops when space
R DL and +R DL
on the first layer becomes full. You must close the first layer to start recording on the second layer (➡ 60).
Closing makes the first layer unavailable for recording (editing is still available). You cannot cancel closing. Make
certain before proceeding.
DVD-R DL
+R DL
≥It is not possible to record to both DVD and VHS drive simultaneously.
M 2
If you record from external
Hallo
equipment
–Select both "M 1" and "M 2" on the
external equipment.
Record to DVD-R, etc.
The second layer
The available
space
(Disc inner
The first layer
side)
Title 1
Hello
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Select the main or secondary audio before recording
(➡ 64, Bilingual Audio Selection)
Hello
If you record from external equipment
–Select "M 1" or "M 2" on the external equipment.
[+R] [+R]DL] [+RW]
Recorded in 4:3 aspect
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
`
Play on other DVD equipment
CHG
Finalise
DC
IN 9V
Title 2
Recording/Playback direction
Hola Hallo
Select the audio that you
want to record in "DVB
Multi Audio" in the on-
screen menu (➡ 43).
M 1
The selected
audio only is
recorded.
(≤: Can do, –: Cannot do)
§
Í /I Í DOUBLE RE-MASTER CD SEQUENTIAL DISC 1 2 3 4 5 ∫ ; 1 :/6 5/9 DISC EXCHANGE DISC SKIP <OPEN/CLOSE
It is not possible to
record continuously
from the first layer to
the second layer.
(Disc outer
side)
RQT8858
7