Network Connection - Panasonic Diga DMR-XW350 Operating Instructions Manual

Additional connections

Network connection

Following function will be available when this unit is connected to the network.
This document is assuming that you already have a broadband connection.
This connection is not necessary if following functions are not to be used.
Enjoying VIERA CAST
Automatically acquire the title
of the CD
Update the software of this
unit
Telecommunications
equipment (modem, etc)
Make the necessary settings in "Network Settings" after connecting. (➡ 92)
Note
Refer to the operating instructions for the connected device.
It may not work properly depending on the equipment or environment used.
Depending on the contract with the provider, you may not be able to connect multiple numbers of terminals such as this unit or computers, or
an additional fee might be required.
Use only category 5 straight LAN cables (STP) when connecting to peripheral devices.
When operating the VIERA CAST, use high-speed internet service no less than 1.5 Mbps for SD (Standard Defi nition) and 6 Mbps for HD
(High Defi nition) picture quality by your local braodband company.
– If using slow Internet connection, the video may not be displayed correctly.
Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
RQT9429
98
You can access a selection of Internet services from the Home screen with VIERA CAST, for example
YouTube, Picasa Web Albums. (Current as of February 2009) (➡ 73)
TM
VIERA CAST requires a broadband Internet connection. Dial-up Internet connections cannot be used.
Automatically acquire the title of the CD or the information about the artist. (➡ 71)
Automatically update the software of this unit. (➡ 94)
Update of the software can be done from the broadcast too.
Internet
Straight LAN cable
This unit's rear panel
COMPONENT
VIDEO OUT
RF OUT RF IN
10BASE-T/
100BASE-TX
Hub or broadband router
When your communication equipment (modem), etc. has
no broadband router functions: Connect a broadband
router. When your communication equipment (modem), etc.
has broadband router functions but there are no vacant
ports: Connect a hub.
Use a router that supports 10BASE-T/100BASE-TX.
DIGITAL
P R P B Y
AUDIO OUT COAXIAL
(PCM/
BITSTREAM)
R-AUDIO-L VIDEO S VIDEO OPTICAL