Rear Panel - Panasonic Diga DMR-ES35V Operating Instructions Manual

Rear Panel

AC IN
1
1
AC IN~ = Power supply
Connection for the power cable.
3
L
Audio output, right/left channel
R
AUDIO OUT
5
AV2 (DECODER/EXT) = 21-pin Scart socket
External unit connection
AV2 (DECODER/EXT)
7
S VIDEO OUT
S VIDEO output socket
9
RF OUT
Aerial output
The outputs of 2, 3, 4, 7 and 8 are dedicated to modules of digital signal processing (DVD).
The video and audio outputs of 5 and 6 are dedicated to modules of digital (DVD) or analogue (VHS) signal processing.
Both groups of outputs are used for analogue and digital sources. But there are limitations, e.g.: During recording or scheduled recording on DVD, the VHS
playback is only possible on outputs of 5 and 6.
For a conventional tube television, we recommend using the Scart socket.
You retain a high-quality RGB video picture with an RGB-compatible television.
!
If you want to use a progressive-capable LCD/plasma television or LCD projector, connect it to COMPONENT VIDEO OUT to get a high quality
progressive video picture.
L
OPTICAL
R
VIDEO OUT
AUDIO OUT
2 3
4
AV2(DECODER/EXT)
5 6
2
OPTICAL
Digital audio output
4
Video output
VIDEO OUT
6
AV1 (TV) = 21-pin Scart socket
TV connection
AV1 (TV)
COMPONENT VIDEO OUT
8
Y
Y = Luminance signal (brightness signal)
P
B
P = Chrominance signal (colour difference)
B
P
P = Chrominance signal (colour difference)
R
R
10
RF IN
Aerial input
COMPONENTVIDEO OUT Y
P
B
S VIDEO OUT
P
R
AV 1 (TV)
7
8
RF IN
RF OUT
9 10
9