Recording; Manual Programming; Vps/Pdc Feature; Autom. Sp/Lp Switching - Panasonic Diga DMR-ES35V Operating Instructions Manual

FUNCTIONS
FUNCTIONS
Timer
Remain DVD 2:00 SP

Recording

VHS --:-- --
Name Date Start Stop
--.--.--- --:-- --:--
Please set Channel.
ENTER
RETURN
Timer
Remain DVD 2:00 SP
Recording
VHS --:-- --
Name Date Start Stop
3 Euros 11.03. SAT 14:00 16:00
Press ENTER to input a programme name.
ENTER
Ü Delete
RETURN
Timer
Remain DVD 2:00 SP
Recording
VHS --:-- --
The remaining time of a VHS cassette will
only be displayed after using a function like
playback, fast forward or such.
If you did not insert a cassette or disc,
the following message appears:
Timer Recording
This programme has been stored.
Insert a recordable cassette.
Cannot set timer standby mode.
ENTER RETURN
34
Recording

Manual programming

12:40:46 24. 2. FRI
Make sure that there is a recordable disc or cassette in the selected drive.
Otherwise, the timer recording will not run.
!
VPS
Press
Mode PDC

Drive

!
Select [Recording] with
--- ---
SP
The Timer Recording screen appears.
!
Programme Name
Confirm [New Timer Programme] with
!
Switch to the next entry with
Name
Number
0 9
Date
Start/Stop : Start time/end of recording. If you press and hold the
12:40:46 24. 2. FRI
Drive
Mode
VPS
Drive Mode PDC
DVD SP On
VPS/PDC : [On] [Off/–]: If you selected [On], timer programmings will only be
Programme Name
!
To enter the title of the recording, select [Programme Name] with
with ENTER
!
Enter the desired name in the Programme Name menu.
!
Press
12:40:46 24. 2. FRI
!
After you have made your changes, save the programming with
!
To enter other programmes, select [New Timer Programme].
The unit automatically switches to timer mode at the start time.
REC flashes in the unit's display one minute before the recording is set to start.
A timer recording does not start while a disc is being formatted, deleted or finalised.
The recording begins afterwards.
If you programmed the timer programmes one after the other in sequential
RAM
order, the first few seconds of the second timer recording are not recorded.
With other types of discs, it is approx. 30 seconds.
If you receive your TV programme via a Set Top Box (DVB-T) or a satellite receiver
(digital/analogue):
On the external unit, select the station with the programme that you want to record.
The station must not be changed during the recording.
It is always the programme on this set station which is recorded.
Name
VPS/PDC : This feature cannot be used.

VPS/PDC feature

If the broadcaster sends VPS/PDC signals, the beginning and end of a recording are
synchronised with the current broadcast time. The programme start time must be
correctly set to the VPS/PDC start time listed in the magazine.
Automatic SP/LP switching during a VHS recording
AUTO: If there is insufficient recoding time left on a video cassette, the SP/LP function
switches the video recording speed to LP; NTSC to EP. This ensures that the
programme is recorded in full. Should the remaining recording time on the video
cassette still not be sufficient even in LP mode, then the programme will not be recorded
in full. Automatic switching to EP mode is not possible.
Drive space
OK : There is sufficient storage space available for the programmed recording.
— : Storage space will not be calculated.
(Date)
!
: The disc was not inserted, it is write-protected or there is insufficient storage
space available.
FUNCTIONS .
and confirm with
: Select the programme position/name of the TV station with
: One-time, daily or weekly programming.
the time increases/decreases in 30-minute intervals. You can also use
the number buttons for these entries.
: Select the drive.
: Recording mode DVD: XP, LP, EP, SP, FR. If you selected VPS/PDC
[On], recording mode FR is not possible.
: Recording mode VHS: SP, LP, EP, AUTO
deleted from the list two days after recording.
.
STOP to apply the name.
: Select AV2 as the name of the TV station with
: The existing storage space is displayed for daily or weekly recordings.
ENTER .
ENTER .
and change the setting with
DVD VHS
.
.
buttons,
and confirm
99 27
ENTER .
.