Status Displays; Screen Information, Symbols - Panasonic Diga DMR-ES35V Operating Instructions Manual

STATUS displays

Status displays
1
DVD-RAM
2
PLAY
3
ZDF
Stereo
4
L R
5
VHS REC
Status displays for other drive.
7
6
Detail information
10:07:21 1.12. Remain
T14 0:05.14 SP T14 0:05.14 SP
9
8
VHS
STATUS
Screen information
DVD-RAM
PLAY
!
Press STATUS
!
Press STATUS
L R
the display changes each time the button is pressed.
!
Also press
You can switch off the status displays in the Setup menu.
1: Current medium
2: Current recording, playback mode and remaining time
3: Current station
4: Sound type: Stereo = a stereo transmission is currently being received.
5: Sound mode: LR, L, R: the soundtrack can be changed with the
REC
PAUSE Pause
PLAY
6: Current date and time
7: Available recording time and recording mode: e.g. 0:50 SP shows 50 minutes in
SP mode.
8: Title number: shows the recording mode and the elapsed play time of the title.
0:50 SP
VHS : Current tape counter.
9: Title number: shows the recording mode and the recording time of the title.
STATUS
VHS screen information
L R SP
!
Press STATUS during playback. Each ti
switches between tape counter and remaining tape time
VHS
L R
REMAIN: 0:24
0:21.29
0:21.29
R
0:21.29
Symbols
The title is being recorded.
Shows a Timer programming.
A daily or weekly Timer recording was stopped. The icon disappears when
next Timer recording starts.
The title overlaps other recordings.
W
The disc was full so the programme failed to record.
F
The programme cannot be played due to damaged data or could not
be recorded for another reason.
The title is write-protected.
The programme was copy-protected; the title was not recorded.
Title that can only be copied once.
The title has been selected.
The title or the playlist was recorded with a TV system other than the one currently
NTSC
selected. Title and playback lists with these markings cannot be played back.
To playback this title/playlist, switch your TV system.
PAL
.
again. Depending on the function, e.g. PLAY, REC or REC PLAY,
STATUS to exit the display.
M1/M2 = a 2-channel transmission is currently being received.
M1 = a single-channel NICAM transmission is being received.
Record
Fast forward (5 stages)
Slow motion (5 stages)
Playback
PLAY/x1.3
Current medium
LR L R , , : The soundtrack can be changed with the
SP
SP : Selected recording mode.
Remaining tape time: The display depends on the
correct setting of the tape length.
Tape counter: It is automatically set to 0:00.00 when a video
cassette is inserted.
Use / RESET to reset the counter to 0:00.00.
Repeat
Rewind (5 stages)
Slow-motion rewind (5 stages)
Quick View Pause playback
me the button is pressed, the display
49
AUDIO button.
AUDIO button.
51
21
15