Panasonic Diga DMR-E95H Operating Instructions Manual page 49

Tabs
Audio Digital Audio Output
Change the settings when you have connected equipment through this unit's DIGITAL AUDIO OUT terminal (
Continued
≥Press [ENTER] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96
kHz or 88.2 kHz.
Dolby Digital Select how to output the signal, to output
DTS
Audio for XP Recording
Choose the audio type when recording or transferring (dubbing)
with XP mode.
Select Audio CH for DV Input
You can select the kind of audio when recording from the unit's
DV terminal ( page 41).
Display Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for these menus and on-screen
messages.
Blue Background
Select "Off" if you do not want to have the unit show the blue
background when reception is weak.
Front Display
Changes the brightness of the unit's display.
TV TV Type ( page 12)
Screen
4:3 TV Settings for DVD-Video
Select how DVD-Video widescreen picture is shown on a 4:3
standard aspect television.
4:3 TV Settings for DVD-RAM
Select how DVD-RAM widescreen picture is shown on a 4:3
standard aspect television.
Menus
"Bitstream" so the connected equipment
decodes the signal, or to decode on this
unit and output the signal as "PCM" (2
channel).
[Note]
Not making the proper settings may result
in noise, possibly damage your hearing
and speakers, and digital recording may
not work properly.
Options (Underlined items are the factory presets.)
≥On:
Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process
signals with sampling frequency of 96 kHz or 88.2
kHz.)
≥Off:
Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
Signals are converted to 48 kHz or 44.1 kHz despite the above
settings if the signals have a sampling frequency of over 96 kHz
or 88.2 kHz, or the disc has copy protection.
≥Bitstream: When connecting to equipment displaying the
Dolby Digital logo.
≥PCM:
When connecting to equipment not displaying the
Dolby Digital logo.
≥Bitstream: When connecting to equipment displaying the DTS
logo.
≥PCM:
When connecting to equipment not displaying the
DTS logo.
≥Dolby Digital (
page 53)
≥LPCM (
page 53)
–The picture quality of LPCM recordings may be lower than
that of normal XP mode recordings.
–The audio recording becomes Dolby Digital even if you
selected LPCM when using a recording mode other than XP.
–When recording MTS broadcast, select the type of audio in
advance from "Select MTS" (
≥Stereo 1: Records audio (L1, R1).
≥Stereo 2: Records added audio such as narration (L2, R2)
subsequent to original recording.
≥Mix:
Records both Stereo 1 and Stereo 2.
When recording MTS broadcast, select the type of audio in
advance from "Select MTS" ( page 48).
≥Automatic ≥Off
≥English ≥Español ≥Français
–Only English is displayed in the TV Guide On Screen
system regardless of the settings. Other languages cannot
be displayed.
≥On ≥Off
≥Bright ≥Dim
≥Automatic:
The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit is turned off
all displays disappear. While using this mode the standby
power consumption can be reduced.
≥Aspect 4:3 & 480I ≥Aspect 4:3 & 480P
≥Aspect 16:9 & 480I ≥Aspect 16:9 & 480P
≥Pan & Scan:
Video recorded for a widescreen is played as Pan & Scan
(unless prohibited by the producer of the disc).
≥Letterbox:
Video recorded for a widescreen is played in the letterbox style.
≥4:3:
Titles played as recorded.
≥Pan & Scan: Video recorded for a widescreen is played as Pan &
Scan.
≥Letterbox:
Video recorded for a widescreen is played in the
letterbox style.
page 9).
page 48).
TM
RQT7392
49