Location Of User's Control - Sharp 20F630 Service Manual

20F630
CU20F630

LOCATION OF USER'S CONTROL

Front Panel
POWER
Press → On.
Press again → Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
VOLUME UP/DOWN
(+) Increases sound.
( ) Decreases sound.
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite programs
by using the 4 categories A, B, C and
D. The channels can be accessed
quickly by using these buttons.
VOLUME UP/DOWN
(+) Increases sound.
( ) Decreases sound.
In menu mode, changes or selects
the TV adjustments.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
MUTE
Press → Mutes sound.
Press again → Restores sound.
CLOSED CAPTION appears when
sound is muted.
POWER (DVD/VCR)
Press → On.
Press again → Off.
DVD/VCR CONTROL
REC
Note:
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.
CHANNEL UP/DOWN
(') Selects next higher channel.
( " ) Selects next lower channel.
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR, sends power and
POWER CATV TV channel select commands (Channel up/
down and Random Access buttons) to
DVD VCR
the TV and VCR control.
Press CATV/DVD, sends power and
DISPLAY INPUT
channel select commands to a cable
TV converter and DVD control.
1 2 3
4 5 6
DISPLAY
Press → Displays receiving channel for
7 8 9
FLASHBACK ENTER four seconds.
0 100
Press again → Removes display.
PERSONAL PREFERENCE
A B C D
CH
VOL VOL
INPUT
— +
Press → Switch to external video INPUT
CH
MENU MUTE SKIP 1 mode or COMPONENT mode.
Press 2 times → Switch to external
POWER (DVD/VCR) VCR-CH
video INPUT 2 mode.
PLAY
Press 3 times → Switch back to the
REC
original TV mode.
REW FWD
STOP
ENTER
PAUSE
Used in some instances where a Cable
Converter Box requires an enter
command after selecting channels,
when using the REMOTE KEYPAD
TV CATV VCR DVD
button.
CHANNEL UP/DOWN
( ' ) Selects next higher channel.
( " ) Selects next lower channel.
SKIP/VCR-CH
6
VIDEO IN 2 L-AUDIO-R
(INSIDE DOOR)
Temporarily displays receiving channel
when in Closed Caption mode.
Moves the »
mark of the MENU
screens.