Summary of Contents for Powertrain DVR1080MC
- Page 1 WITH REVERSING MIRROR Instruction Manual Thank you for purchasing Powertrain Portable DVR. In order to help you operate the unit correctly, please read this instruction carefully before using. Part No: DVR1080MC...
- Page 2 Appearance Description 1. DVR Display 11. AV output jack 2. Function Lights 12. Micro SD Card Slot (card not included) 3. Charge Indicator 13. HDMI output jack 4. Menu key 14. Power button / Mode button 5. Up Key 15. Reset hole 6.
- Page 3 Charging Options 1. Connect device to car charger through USB port, the device will power on automatically, enter standby mode and start charging with green indicator light on. Once the device is fully charged, the green indicator light will go out. 2.
- Page 4 Operating Instructions Power On/Off Device 1. Press the POWER key for 1 second to switch on and hold for 3 seconds to switch off the device manually. 2. While device is connected to the car, the device will turn on automatically when engine is started. When car engine shuts off or car charger been disconnected, the device automatically switches off after 10 seconds (unless feature is turned off).
- Page 5 Set Video Menu In video or image mode press the MENU key then OK to enter the “Video menu”. Navigate through options using UP/DOWN key and press OK to select. Press POWER/MODE button (top of unit) to change selection. - Movie size: FHD (1080P) / HD (720P) - Seamless: Off / 1min / 3min / 5min.
- Page 6 3. Protect/Unprotect In playback mode choose the file to be protected or unprotected and press the MENU key to show the Delete/Protect menu. Press DOWN/UP key followed by OK then choose from either ‘single’, ‘protect all’ or ‘unprotect all’ using UP/DOWN keys. Press OK followed by UP/DOWN key and OK once more to execute. Computer Playback (For use with optional GPS antenna) DVR unit can also be used to record and report location.
- Page 7 5. Double click on the file to be played. Video will play in left window, location and drive speed as at the end of recorded segment will be displayed in right hand window as below. HDMI / TV Function Operation Can be connected to TV using a HDMI cable for playback of high-quality video Connecting to a Computer If CarDVR player software can not be used on your computer, video can be viewed using other installed...
- Page 8 Fault Remedy Anti virus software detects software as a Enable permissions in anti virus software. See anti virus virus software help menu on how to do this. Device reports error when SD card is Check spec of card. Must be a high speed SD card inserted class 10 or higher is recommended.
Need help?
Do you have a question about the DVR1080MC and is the answer not in the manual?
Questions and answers