Panasonic WV-CL920 Operating Instructions Manual page 17

• Opening the Setup Menu
Press and hold down
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
LENS DRIVE
END SET UP DISABLE
The CAM SET UP menu appears on the monitor as
shown above.
Check the current settings on the menu.
Refer to the sections below for a detailed description of
menu items. If you decide not to make any changes
after checking the current settings, move the cursor to
END at the start of the bottom line, and press
close the CAM SET UP menu and return to normal cam-
era picture mode.
for 2 seconds or more.
Blinking
OFF
ALC
OFF
ON (DNR-H)
OFF
INT
ATW1
OFF
DC
Note: If no button is pressed for 6 minutes while the
CAM SET UP menu or any other menu is opened,
the menu is automatically closed and the mode
returns to the normal camera picture.
to
-18-