Page 1
Rio Grande portable spa - Assembly Guide Parts: Rio Grande inflatable spa Take all the spa components out of the outer box and check your Instruction Manual that all the following key components are present: Box includes: A) Spa /liner (with integral Control...
Page 2
Rio Grande portable spa - Assembly Guide Assembly: Inflating the spa: Before assembling the spa make sure the site is level and clear of debris and sharp objects. Lay out your spa base on a clean, level area more than 2.5 square metres and capable of supporting a weight of more than 300kg/m2.
Page 3
Rio Grande portable spa - Assembly Guide Assembly: Inflate the spa lid using the same inflation procedure as the spa body. Attaching the Control Unit: Ensure that the Blower Check valve, located under the Control Unit (see photo right), is tightly securely.
Rio Grande portable spa - Assembly Guide Assembly: The spa is now ready to heat. Just press the heater button to commence heating. Locking the Spa Control Unit: Locking the spa Control unit: Lock the spa Control Unit by pressing the up and down buttons simultaneously on the Control panel.
Rio Grande portable spa - Assembly Guide Draining the spa: Draining the spa: Ensure the internal connector caps are screwed on. Unplug the internal spa plug, then unscrew the external Drain cap and attach the drainage extension hose. Drain the spa.