Page 1
Electric Quiet Shredder 2400W Owner’s Manual Important Please read this Owner’s Manual and the Express Warranty before using this product. The Warranty does not cover damage due to misuse or failure to follow the operating and assembly instructions. Keep these instructions in a safe place for future use. www.morrisonoutdoor.com Part N : 571728.E.0...
Do not operate this machine before it has been 10. Switch off the motor and unplug before servicing, cleaning, maintenance or repairing assembled correctly and you have read and 11. Wait until all the machine parts stop completely understood these instructions. 12.
Page 4
• When using the extension cable, make sure that it does not unusual noise interfere, is not squeezed or bent, and the plug does not get Clearing inlet or discharge opening wet. Attaching or removing retaining basket • When using a cable reel, wind the cable completely off the reel. Transporting •...
• Inspect the machine for possible damage: Whether safety devices work properly for its intended function Whether all the moving parts work smoothly and adequately Whether all parts are not damaged and properly installed Replace or repair by our authorized service centre if there are any damaged parts.
Assembly CAUTION: Always be sure that the machine is switched off and unplugged before carrying out any work on the tool. Place the upper enclosure upside down on the flat floor and then put the base frame on it. Be careful about the direction of the part.
Lock lever: Upper position Retaining basket is locked. Lower position Retaining basket is unlocked. ATTENTION: The machine will not start if the lock lever is in the “unlock” position. The machine automatically stops if the retaining basket is unlocked during operation. Blade cover CAUTION: •...
Technical Data Turn the fixing knob clockwise to lock the hexagon socket-head bolt. Warning! Model YT5461-01 Failure to follow these instructions will cause damage to the Name Electric Shredder machine Motor AC-Motor 230-240V, ~50Hz...
Troubleshooting WARNING: Before solving troubles, switch off the machine, pull out the mains plug, and wait until the machine stops completely. Trouble Possible cause Remedy Motor does not start No power supply Check mains supply. Mains cable defective Ask authorized service centre for checking. Wait until the machine cools down and press the Overload protection is activated green button.
Need help?
Do you have a question about the YT5461-01 and is the answer not in the manual?
Questions and answers