Dräger IR3 Instruction Manual

Instruction Manual Dräger MSI Printer IR3
Contents:
1. Warning
2. The Printer
3. Functions and User Instructions
4. Maintenance and Service
5. Specification
1. Warning
Any use of the MSI printer IR3 requires a full understanding and strict adherence to these instructions and to na-
tional and international standards. The instrument is only to be used for the purposes specified in here.
Since 2005 EC specifications for disposal of electric and electronic equipment are valid. These are regulated
in the 2002/96/EC directive and respective national law. Essential content is the establishment of special
collection and recycling facilities for private users. Since this device is not registered for private users, it is not
allowed to dispose it in this way. For disposal you can send it back to your local Dräger Safety organisation and if
requested, get further information concerning this matter from Dräger MSI GmbH.
2. The Printer
The MSI IR3 is a thermo printer with infrared data transfer. It is designed for fast documentation of measured and
calculated values of the measuring instruments from Dräger MSI.
To do this, there has to be activated " MSI Printer " in the " Adjustment Menu " of the used instrument (see instruc-
tion manual of the instrument). In other case the printing is done with normal velocity (velocity of used printers with
infra red data transfer).
The printer can be used also with older MSI 150 (Joker, Basic, Classic, etc), in this case the printing is done with
normal velocity of course.
2.1 Printer - Top View
5695044
Page 1
Page 1
Page 2
Page 3
Page 4
Page 1 of 4
Paper cup lid
Status indicator (LED)
Mode button
IR interface
Edition 2014-01-09