Summary of Contents for Hall Research Technologies SC-CSV-HD
Page 1
User’s Manual SC-CSV-HD Composite & S-Video to HDMI Video Processor UMA1248 Rev n/c CUSTOMER Order toll-free in the U.S. 800-959-6439 FREE technical support, Call 714-641-6607 or fax 714-641-6698 SUPPORT Mail order: Hall Research, 1163 Warner Ave. Tustin, CA 92780 INFORMATION...
1.0 Introduction 1.1 General Thank you for purchasing Hall Research’s SC-CSV-HD. This unit can convert and scale composite Video or S-video into an HDMI signal of user specified resolution. The unit takes advantage of the HDMI signal's ability to embed audio with video and supports a wide range of HDTV and PC resolutions;...
Video to HDMI Processor 2.0 Installation 2.1 Connections The SC-CSV-HD accepts either S-video or Composite inputs. The output is HDMI, but can also connect to DVI monitors using HDMI-to-DVI cable (not included). Connect the audio source to the analog L/R input connectors or use the TOSLink connecter if using an optical fiber audio input.
SC-CSV-HD 2.3 Package Contents (1) Model SC-CSV-HD (1) 5V DC Universal Power Supply (Do Not Substitute) (1) 2-RCA to 2-RCA audio cable (1) Composite video cable (1) User’s Manual 3.0 Configuration & Operation 3.1 Input and Output 3.2 OSD Menu Pressing the Menu button will bring up the OSD menu controls on the screen.
SOURCE (Input Interface) INPUT ( Input Resolution) INFORMATION OUTPUT (Output Resolution) VERSION (Firmware Version) MODEL SC-CSV-HD EXIT EXIT OSD * The NATIVE output setting causes the scaler output to be the best matched to the native resolution of the connected display.
Use arrows to scroll thru the available resolutions listed. See Section 6 below for a list of all available resolutions. The default output resolution after a factory reset of the SC-CSV-HD is “Native”. If connected to an HDTV via HDMI input, then use the highest resolution your display supports from among 480p, 720p50/60 or 1080i/p.
4.1 Contacting Hall Research If you determine that your SC-CSV-HD is malfunctioning, do not attempt to repair the unit instead, contact Hall Research Technical Support at 714-641- 6607. To return the unit to Hall Research you must first get a Return Authorization (RMA) number.