Table of Contents
Advertisement
• The motion images cannot be recorded
without audio.
• The settings of auto focus/zoom/aperture
values are fixed to what they are when
recording starts (in the first frame).
• Depending on the type of card, the card
access indication appears for a while after
recording motion images. However, this is
not a malfunction.
• When you set the picture quality to
[30fpsVGA] or depending on the type of
card, recording may stop while you are
recording motion images. We recommend
using a high-speed SD memory card
indicated with "20 MB/s" or above on its
package.
• If you use a card in which pictures have
been recorded and deleted repeatedly,
recording may stop in the middle while
you are recording motion images. We
recommend you to clean up the card in
advance. (P81)
• We recommend using Panasonic's SD
Memory Card. (Use only the genuine
SD card with SD Logo.)
• When motion images recorded with the
camera are played back on other
equipment, the quality of pictures and
sounds may be deteriorated or it may not
be possible to play them back.
• Motion images recorded with setting to
[30fpsVGA], [30fpsQVGA] or [10fpsVGA]
on this camera cannot be played back on
equipment which does not support these
settings.
• In motion image mode [
use the direction detection function and
the review function.
• You cannot set [MODE2] on the optical
image stabilizer function.
52
VQT0R57
Recording pictures (advanced)
], you cannot
Advertisement
Table of Contents
