Taking Pictures Using Auto Bracket - Panasonic DMC-FX2GN Operating Instructions Manual

Panasonic digital camera operating instructions
Table of Contents

Advertisement

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically
recorded by each press of the shutter
button according to the compensation
range of the exposure.
You can select the desired exposure
among the 3 types of pictures.
1 Press
3
several times until
[
AUTO BRACKET] appears
and then set the compensation
range of the exposure.
AUTO BRACKET
SELECT
• You can select the exposure from
j1 EV to i1 EV in steps of 1/3 EV.
• When you do not use auto bracket,
select [OFF].
Recording pictures (basic)
• When setting the auto bracket, the auto
bracket icon appears on the lower left of
the screen.
• When taking pictures using auto bracket
after the exposure compensation, the
pictures are based on the compensated
exposure.
When the exposure is compensated, the
compensated exposure value appears on
the screen.
• When the flash is activated, you can take
only 1 picture.
• When setting auto bracket, you cannot
use the audio recording function on
DMC-FX7.
• When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
• The exposure may not be compensated
with auto bracket depending on the
EXIT
brightness of the subject.
• The setting of auto review function is fixed
to [1SEC.]. (The picture is not enlarged.)
• Auto bracket is cancelled after switching
the camera off.
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-fx7gn

Table of Contents