SMC Networks SMC2655W Quick Start Manual page 6

5. Windows NT will attempt to locate the SYS and INF files in
the specified path. If you have entered the path name
correctly, Windows NT should copy the appropriate drivers to
the Windows NT system. You need to acknowledge the
selection by clicking "OK."
6. The Adapter Setup dialog box will appear. Configure the card as
described below, and click "OK."
IRQ Level - Default: 5
(Check for available resources under Windows NT Diagnostics.)
I/O Port Address - Default: 240
(Check for available resources under Windows NT Diagnostics.)
7. Click "Close" to finish the installation.
8. After driver installation, the system will prompt you to restart
the computer. Click "NO" if you want to continue installation for
your network protocols and options.
9. Select the Services tab and Click "Add..." to install the network
protocols you want to use, such as IPX/SPX, NetBEUI or TCP/IP.
If you install TCP/IP, be sure to set the appropriate Gateway,
DNS Server, and Domain for your network.
10.If you install an IPX/SPX-compatible protocol, then you also
need to install the "Client for NetWare Networks."
11.Click on the "Identification" tab on the Network dialog box,
and specify your computer name and network workgroup.
12.Restart your computer.