Page 1
HWPRS Programmable thermostat User instruction manual...
Page 2
3A resistive. The thermostat is battery-powered and designed for wall mounting, using the backplate supplied. The HWPRS provides a volt-free contact to switch any load up to 3A @ 230V 50Hz and can be positioned wherever you would normally fit a room thermostat.
Page 3
The HWPRS incorporates a factory pre-set program. You can view and amend any of the times or temperatures within the pre-set program, which is shown in the table below. Note that, if no key is pressed for 15 seconds, the...
Page 4
Additional functions: Additional functions: Additional functions: Frost protection: Whilst in the normal running mode, press and hold the button for 3 seconds to activate Frost Protection. The frost protection indicator shown in the illustration will flash. While frost protection is activated, the temperature set-point is 5 C.
Need help?
Do you have a question about the HWPRS and is the answer not in the manual?
Questions and answers