ADC EFM-832 Quick Installation Manual

O
VERVIEW
®
The ADC WorldDSL-ETSI Model EFM-832 Fuse Alarm Module protects shelf-mounted line
units from over current conditions at the exchange office power supply. The EFM-832 mounts
externally on the EMS-832 Exchange Office Management Shelf.
The exchange office power supply is connected to -48 Vdc inputs on the EFM-832 Fuse
Alarm Module. The fuse-protected outputs of the EFM-832 are connected to the -48 Vdc
inputs on the shelf.
An overcurrent condition at the exchange office power supply opens a protection fuse on the
EFM-832. An open protection fuse routes exchange office power to local alarms, signaling
the overcurrent condition.
P D
RODUCT ESCRIPTION
The EFM-832 Fuse Alarm Module is shown in
include:
• A fuse module cover with circuit-board mounted fuse holder, terminal strip, and
shelf-power wire leads.
• Two GMT type 10-ampere fuses.
Figure 1. EFM-832 Fuse Alarm Module
WorldDSL-ETSI Fuse Alarm Panel (EFM-832)

Quick Installation Guide

Figure 1. Major components of the EFM-832
S
PECIFICATIONS
Compatibility Works with EMS-832 (16-slot, front connector access).
Power Input
Input Voltage Range -36 Vdc to -72 Vdc
Fuses
Fuse Type Buss GMT
Rating (Fuses A and B) 10 A
Page 1 of 4