Pairing The Speaker - Samsung YA-SBR510 User Manual

Using Bluetooth

Pairing the speaker

Before you start!
When pairing the speaker to another Bluetooth device, we
▶
recommend keeping a distance of less than 1 meter(3 feet)
between the two devices.
1
With the speaker powered-off, press and hold the [ ]
button on the speaker or the remote control for 5 more
than seconds.
The Bluetooth connection LED blinks and the speaker enters
●
the pairing mode.
The pairing standby status lasts about 3 minutes. After 3
●
minutes, you should turn off and restart the speaker.
2
Select the Bluetooth menu on the Bluetooth
device.
3 Search for Bluetooth devices available on the
device you are using and select <SBR510> from
the search results.
When selecting a device to connect, select <Stereo
●
Headset> so that you can listen to music from the speaker.
For more information, refer to the user manual for the
●
applicable device.
02110B-YA-SBR510-ENG.indd 09 02110B-YA-SBR510-ENG.indd 09
(continued)
You must pair the speaker with external
devices you use before you can connect it
4
If the Pin code input window appears, enter
<0000>.
The pairing of the speaker is completed.
●
참고
Notes
◆
You only need to pair it once.
◆ Check the pin code of a Bluetooth audio dongle if you use it to
connect this product to another device.
If the pin code is other than <0000>, the connection will not be
made.
◆ You can check the Bluetooth mode from the Bluetooth
connection LED.
Bluetooth Status LED Indicator
Pairing Standby
Connected Turned On
Blinking
Product Use _09
2008-09-08 오후 4:06:17 2008-09-08 오후 4:06:17