Preparation; Initial Set Up - Vax VCW-06 User Manual

PREPARATION

! !

Initial set up

! !
IMPORTANT: Carpets should be dry vacuumed thoroughly before washing.
Check the carpet is colour fast
Before cleaning carpet/upholstery, test for colour fastness. Dampen a white cloth with solution.
Test a small area somewhere discreet. Gently rub the cloth over the area. Check each colour
for colour bleeding. If the cloth remains clean, it should be safe to clean the carpet/upholstery.
Helpful hints for cleaning carpet
1. Do not saturate carpet with water and cleaning solution when using the carpet washer.
2. For heavily soiled areas, additional applications may be necessary.
3. Allow plenty of time to dry carpet thoroughly.
4. Wipe cleaning solution from woodwork and wood to prevent any damage.
5. Try not to walk on carpet until it is completely dry.
6. After carpet is thoroughly dry, vacuum once more.
7. Ensure the power cable is hooked on the machine handle within the marked line area when in use.
The carpet washer will be fully
assembled in the box, simply lift out.
Moving the carpet washer
! !
! !
CAUTION: Always make sure both tanks are empty or remove both tanks off the carpet washer
and refer to Manual Handling Operation Regulations before moving and lifting.
6
Pull the handle upwards until it clicks and locks into place.
vaxcommercial.co.uk