Preset Station Calling - Panasonic CQ-DP383W Operating Instructions Manual

Removable front panel mp3 wma cd player/receiver with cd changer control

Hide thumbs Also See for CQ-DP383W:

Service manual (82 pages)

Table Of Contents

Table of Contents

Radio

Radio Mode

Press [SRC] (source) to change to the radio

mode.

[MONO/LOC]

(mono/local selection)

Band

Press [BAND].

Tuning

[$]: Up

[%]: Down

Press and hold [%] or [$] for more than

0.5 seconds, then release.

Seeking will start.

Mono/Local Selection

Press and hold [MONO/LOC] for more than

2 seconds.

Release when at the desired mode.

MONO (monaural):

Noise reduction when the receiving sensitivi-

ty becomes low.

MONO OFF: Receiving in stereo. (default)

MONO ON: Receiving in mono and reducing

the noise level.

lights.

CQ-DP383W

Radio mode display

Band

Frequency

FM stereo indicator

[1] to [6] (preset station)

(Press and hold.)

2 sec.

LOCAL:

Setting when searching for a station.

LOCAL OFF:Searching even for a relatively

low-intensity radio wave sta-

tion. (default)

LOCAL ON: Searching only for a high-in-

tensity radio wave station.

lights.

Caution:

≥ To ensure safety, never attempt to preset stations while you are driving.

Display Change

Press [DISP] (display).

Radio mode display

(default)

Clock display

Preset Station Setting

Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.

Manual Preset Memory

Manually save a station in the preset memory.

Select a band and frequency. (previous page)

Press and hold [1] to [6] for more than

2 seconds to memorize.

≥ The display blinks once, and a receiving sta-

tion is saved in the memory.

Preset number

Note:

≥ Existing saved stations are overwritten with new stations after this procedure above.