Checking After Installation - Panasonic NA-140XS1 Operating & Installation Instructions Manual

Checking after Installation

Appliance parts checklist
Anchor rods
Have you removed all 2 anchor
rods and fitted cover caps?
(P.38, 39)
Anchor rods (2)
Do not remove the fastener of the drain hose
in the upper left.
Adjustable feet
Are they stable and securely
tightened? (P.39)
Is the appliance level? (P.39)
Installation place
Is the appliance on a flat, stable
surface?
Does it run without vibrating?
(P.39)
42
Mains plug
Is the appliance plugged into an
AC 220-240 V household mains
socket? (see back cover)
Water supply hose
Mains plug
Drain hose
Adjustable feet (4)
Water supply hose
Is the water supply hose
properly connected? Is it free
from leaks? (P.41)
Drain hose
Is the drain hose properly
connected? Does it drain
normally? (P.41)
Test run
6 8 5 10 9
1
Turn on the tap.
2
Close the door without any
laundry in the drum.
3
Switch on the appliance.
4
Select the "Quick 50"
programme.
5
Select M.
6
Start operation.
7
Switch the appliance off
and on.
8
Select .
9
Press for about 5
seconds.
is displayed.
10
Press while is
displayed to start test
run.
is displayed.
Operation finishes after about
3 minutes.
4 7 3, 7
Water leaks
Check the appliance and hose
joints for leaks. (P.40)
Abnormal noise
Make sure the appliance is
level. (P.39)
Error display
Unable to drain (P.36)
Unable to supply water
(P.36)
After resolving an error, open
and close the door and press
"Start/Pause" to resume the test.
7
43