Panasonic SC-BTT770 Easy Setting Manual page 2

Easy Setting Guide
The order of setting
1
Prepare the
speakers
See below
1
Prepare the speakers
STEP 1

Back of the base
Pull the cable straight
along the line and slide
into the groove.
STEP 3
Label each speaker cable by
attaching the numbered sticker
at the position indicated in the
illustration. Be sure to match the
number on each sticker with the
circled number in the illustration.
STEP 4
Connect the speaker cables
Insert the wire fully, taking care
not to insert beyond the wire
insulation.
: White
: Blue line
Speakers
Front speakers
Centre speaker
Surround speakers
2
2
 
Tighten securely.
e.g., Front speaker Lch
WHITE
.
PUSH!

FRONT/AVANT
CENTER/CENTRE
SURROUND/AMBIOPHONIE
2
Place the
speakers
See below
Front speaker
Stand
1
2
Base
Subwoofer
PURPLE
FRONT
Lch
→
1
speaker
White

Blue line
Refer to the rear label of the speaker before connecting
the corresponding cable.
Verify the type of speaker with the label on the rear of
the speaker.
STEP 2

Leave about
80 mm
Centre Front
speaker speakers
Rch Lch
GREEN RED WHITE
  