Camera Functions; List Of Menus - Panasonic NV-MX500B Operating Instructions Manual

Hide thumbs Also See for NV-MX500B:
Table of Contents

Advertisement

1
Press the [MENU] Button
(26)
SHUTTER/IRIS/
VOL/JOG
(51)
≥The Menu corresponding to the Mode selected by using
the [OFF/ON/MODE] Switch
(33)
2
Turn the [PUSH] Dial
(26)
Sub-Menu.
≥Turn the [PUSH] Dial
(26)
item.
3
Press the [PUSH] Dial
(26)
Sub-Menu.
4
(26)
Turn the [PUSH] Dial
5
Press the [PUSH] Dial
(26)
desired mode.
≥With each press of the [PUSH] Dial, the cursor [1]
moves to the next mode. Menu items that cannot be
used in combination with the selected item are displayed
in dark blue.
≥While a Menu is displayed, you cannot record or play back.
Menus can be displayed during playback but not during
recording. The above operations can be done using the
[MENU] Button, [SET] Button and [ITEM] Button on the
Remote Controller. (
)
-6-
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained even when
the Movie Camera is turned off. However, if the Battery or
AC Adaptor is disconnected before turning off the Movie
Camera, the selected setup may not be retained. (But, the
setups of [EFFECT2] (
) are not retained.)
-23-
≥Menu operation flow is shown in this text by >>.
ª File Selection in the Card Playback Mode
A File Selection Operation may be necessary during Menu
Operations. In this case, carry out the following procedure.
1
(26)
Turn the [PUSH] Dial
≥The selected file is marked by a frame.
No.25
2
Press the [PUSH] Dial
(26)
the file.
≥After the above File Selection Procedure, carry out the
various Menu Operations. (The above procedure will not be
repeated in the following instructions.)

List of Menus

The figures of the Menus are for explanation purposes only,
and they are different from the actual Menus.
(51)
.
PUSH
(33)
is displayed.
to select a desired
to display the highlightened
to display the selected
to select the item to be set.
to set the selected item to a
and select a file.
PICTURE
100-0012
to confirm the selection of
Before Use
ª [CAMERA FUNCTIONS]
Camera Mode Main-Menu
1) [CAMERA SETUP]
Camera Setup Sub-Menu
[PROG.AE]
Auto Exposure Mode
[PROGRESSIVE]
Progressive Photoshot Mode
[D.ZOOM]
Digital Zoom
-17-
[CINEMA]
Cinema-like Format Recording
[REC MODE]
Recording Mode
-16-
[ASPECT]
Wide Mode
-18-
[RETURN]
Returning to the Main-Menu
≥If you set [RETURN] to [YES], the menu changes back to
the Main-Menu.
2) [ADVANCED FUNCTIONS]
Advanced Functions Sub-Menu
[ZEBRA]
Zebra Pattern
-21-
[MIC LEVEL ADJ.]
Microphones Sensitivity Level
[PICTURE ADJ.]
Picture Adjustment
[COLOUR BAR]
Colour Bar
-22-
3) [DIGITAL EFFECT]
Digital Effect Functions Sub-Menu
[EFFECT1]
Digital Effects 1
-22-
[EFFECT2]
Digital Effects 2
-23-
4) [CARD SETUP]
Card Setup Sub-Menu
[PICTURE SIZE]
Picture Size
-32-
[PICTURE QUALITY]
Picture Quality
-32-
[MPEG4 MODE]
MPEG4 Picture Quality
[LOW LIGHT SHOT]
Card Low Brightness
[CREATE TITLE]
Title Creation
-36-
5) [MULTI-PICTURES]
Multi-Picture Mode Sub-Menu
[SCAN MODE]
Multi-Picture Mode
[SPEED]
Strobe Multi-Picture Speed
[SWING]
Swing Mode
-24-
[P-IN-P]
Position of Small Picture inside Normal Picture
6) [RECORDING SETUP]
Recording Setup Sub-Menu
[REC SPEED]
Recording Speed Mode
-11-

CAMERA FUNCTIONS

1.CAMERA SETUP
2.ADVANCED FUNCTIONS
3.DIGITAL EFFECT
4.CARD SETUP
5.MULTI-PICTURES
6.RECORDING SETUP
7.DISPLAY SETUP
8.OTHER FUNCTIONS
9.DEMO MODE
PRESS MENU TO EXIT
-18-
-16-
-18-
-21-
-22-
-33-
-31-
-24-
-24-
-14-
-23-

Advertisement

Table of Contents
loading

Table of Contents