Panasonic TH-42PA20 Operating Instructions Manual page 26

Picture Adjustment
Colour temperature
Set the overall colour tone of the picture.
Press to switch between modes.
P-NR (Picture Noise Reduction)
Automatically reduces undesired picture noise.
Press to switch between modes.
3D-COMB
If the 3D-COMB function is On, dot interference or
cross colour will be reduced.
Press to switch between On and Off.
Note:
Displayed only when receiving PAL or NTSC signals.
Not displayed during S-Video input and YUV input mode.
Helpful Hint (
By pressing the Normal "N" Button on the Remote Control while the Picture menu is displayed, the selected menu will
be changed to the Normal Mode.
Normalization will not occur if the menu is not displayed when the "N" Button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called "Normalization".
26
Standard Warm
Strong
Off
Auto Weak
On Off
Normalization)
Cool
Picture menu
Dynamic
Menu
Contrast
Brightness
Colour
Sharpness
Colour temperature Standard
P-NR Auto
On
3D-COMB
Picture menu
Dynamic
Menu
Contrast
Brightness
Colour
Sharpness
Colour temperature Standard
P-NR Auto
3D-COMB On
Picture menu
Menu Dynamic
Contrast
Brightness
Colour
Sharpness
Colour temperature Standard
P-NR Auto
On
3D-COMB