Network
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network
environment.
●
If you do not have any broadband network services, please consult your retailer for assistance.
●
Prepare the internet environment for wired connection or wireless connection.
●
Setup of the network connection will start after the tuning (when first using the TV).
■
Wired connection
TV
■
Wireless connection
Built-in wireless LAN
Using clamper
●
Do not bundle the RF cable and mains lead
together (could cause distorted image).
●
Fix cables with clampers as necessary.
●
When using the optional accessory, follow the
option's assembly manual to fix cables.
LAN cable (Unshielded)
●
Use the Unshielded Twist Pair (UTP) LAN cable.
Ferrite core - Large size (supplied)
Installing the Ferrite core
Pull back the tabs
(in two places)
Access point
Internet environment
■
Attach the clamper
Insert the
clamper in a hole
To remove from the TV:
∗ Less than 10 cm
Internet environment
Wind the cable twice
Clamper
(Standard accessory)
hole
snaps
Keep pushing
both side snaps
(p. 13 - 15)
Close
Bundle the cables
Set the tip in
the hooks
hooks
To loosen:
Keep pushing
knob
the knob
11