Picture Quality - Panasonic DVD-LX9 Operating Instructions Manual

Using this unit with other equipment
Using this unit with a television
Before connecting, turn off all equipment and read the appropriate operating instructions.
Do not connect the player through your video cassette recorder. The picture may not be played
back correctly due to the copy guard.
Connecting the multi cradle
AUDIO OUT VIDEO
5.1ch
OUT
2ch (MIX) +
SORROUND FRONT
SPEAKER
4≠
-
L
L R L
red white yellow
yellow
Audio/video cable
(not included)
Connecting the player
Right side
black
yellow
[For\the\United\Kingdom\and\Continental\Europe]
Use the RCAJ adaptor (not included) if your TV has a 21-pin SCART terminal.
RCAJ adaptor (not included)
red
To the television's
white
21-pin SCART
yellow
terminal
Note
≥The speakers do not have magnetic shielding. Do not place near televisions, personal computers,
magnetized cards (bank cards, commuter passes, etc.) or other devices easily influenced by
magnetism.
≥Volume may be lower when playing DVDs than when playing other discs or during TV broadcasts.
36
If you turn the volume up, reduce it again so that a sudden increase in output does not occur.
Television
Enjoying higher

picture quality

VIDEO IN
You can connect the
AUDIO IN
L audio cable to the
white 2-channel audio input
terminals of an analog
amplifier or system
R
component to enjoy
red
stereo or Dolby Pro
Logic.
red white yellow
Audio/video cable (included)
black
To [AUDIO, OPT OUT]
To [VIDEO]
yellow
Audio/Video cable (included)
Multi cradle
COMPONENT VIDEO OUT
(NTSC : 480P/480I , PAL : 5761)
+
Y P
SPEAKER
4≠
-
R
Television's
COMPONENT
VIDEO IN
terminals
Video cable (not included)
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or
progressive output and provide a purer picture than the S
VIDEO OUT terminal. Connection using these terminals
outputs the color difference signals (P /P ) and luminance
B R
signal (Y) separately in order to achieve high fidelity in
reproducing colors. The description of the component video
input terminals depends on the television or monitor (e.g.
Y/P /P , Y/B-Y/R-Y, Y/C /C ). Connect to terminals of the
B R B R
same color.
When making this connection, ensure you connect the audio cables to the corresponding audio input
terminals on the television.
Note
There is no video output when connected with the COMPONENT VIDEO OUT terminal.
SD
To enjoy progressive video
1. Connect to the component video input terminals on a 480P compatible television. (Video will not
be displayed correctly if connected to an incompatible television.)
2. In SETUP menu, set "Progressive Out (Component)" to "Enable" (➡ page 39).
3. Change "Video output mode" to "480P" (➡ page 34).
≥All televisions manufactured by Panasonic and that have 480P input connectors are compatible.
Consult the manufacturer if you have another brand of television.
≥If the unit is connected to the television through VIDEO OUT or S VIDEO OUT, output will be
interlace, irrespective of the settings.
Watching video from a video camera
This unit (Right side)
yellow
black
Press [DVD/SD/AUX] to select "AUX".
Control play on the camera.
Auto standby function (➡ page 17) does not work while the "AUX" mode is on. Turn the unit off when
you have finished using it.
Note
Only output from NTSC system cameras can be shown.
VIDEO
S VIDEO AUDIO OUT 5.1ch
OUT OUT
2ch (MIX)
SUB
B P R WOOFER CENTRE SORROUND FRONT
R L R L
Television's
S VIDEO IN
S video cable (not included) terminal
S VIDEO OUT terminal
The S video terminal achieves a
more vivid picture than the VIDEO
OUT terminal by separating the
chrominance (C) and luminance
(Y) signals. (Actual results depend
on the television.)
For Asia only
Audio/video cable
(included)
Video camera
yellow
white
red
37