Panasonic ER-GC20 Operating Instructions Manual page 4

7. Cut hair to the correct
height by moving the
clipper back against the
flow of the hair.
• Do not use the clipper in an inverted
position. This can cut hair too deeply.
Removing the comb attachment
1. While pressing on the trimming
height adjustment button, slide the
comb attachment until it comes off
the main body.
Trimming without a comb attachment
Trimming your hair without a comb
attachment will trim hair length to approx.
0.5 mm.
1. Cut hair by placing the clipper head
directly on the scalp.

How to Cut Hair
1. Trimming overall height
1. Mount and adjust the comb attachment to the
required setting. (See page 3.)
2. Cut slowly toward the top of your head.
• Press the tip of the comb attachment against your scalp.
Front
• Crisscross in various directions to trim thoroughly.
2. Finishing the neckline
1. Mount and adjust the comb
attachment to the required setting.
<Setting the trimming height (Reference)>
• 12 mm overall 9 mm neckline
• 9 mm overall 6 mm neckline
2. Cut a little shorter around the ears
and neckline.
• Raise the tip of the comb attachment little
by little from the hairline.
• Raise with a bending of your wrist.
Rear Side