Advertisement
Set the Matrix Switcher and the Camera Controllers (up to 8) shown below.
Models
Parameters
Daisy
:
On
It is not available 2 Line (Half Duplex) connection in a
Daisy-Chain.
Caution
It is only available an alarm data connected unit in a
Daisy-Chain. Set the Mode Selection Switch on the one
of Camera Controllers to the "NORMAL" position and
the others are set to the "ALARM OFF" positions.
SPECIFICATIONS
Data Input/Output(1 - 8):
Max. Cable Length:
Max. Number Boards:
Dimensions:
Weight:
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice
Matrix Switcher
WJ-SX550A
F/H Duplex : Full
Camera In Number #1 - - -
Camera In Number #2 - - -
Camera In Number #3 - - -
Camera In Number #4 - - -
Camera In Number #5 - - -
Camera In Number #6 - - -
Camera In Number #7 - - -
Camera In Number #8 - - -
Note
RS-485 (Full Duplex or Half Duplex, selectable inside the switch)
[5-pin T(A), T(B), R(A), R(B), GND] X8
use with shield, twisted pairs data cable
Transmitting Speed (Baud Rate); 1200 - 19200 bps
1,200 m (4,000 ft)
8 (Address 1 - 8, Total 1 - 64 Data Input/Output)
24.5 (W) x 265 (H) x 260 (D) mm
15/16" (W) x 10-7/16" (H) x 10-1/4" (D)
400g (0.9 lbs.)
Camera Controller
WV-RM70
Unit Number :
1
Unit Number :
2
Unit Number :
3
Unit Number :
4
Unit Number :
5
Unit Number :
6
Unit Number :
7
Unit Number :
8
-7-
Advertisement
