Table of Contents
Advertisement
R When removing the battery, make sure you turn off the handset first.
R To avoid loss of data or malfunction, do not damage, carelessly handle, or
short-circuit the gold-colored contacts of the microSD card.
1
2
3
4
5
Note:
R If the battery is fully charged, but the operating time seems to be shorter, clean
the charge contacts of the handset and charger with a dry cloth and charge
again.
For assistance, please visit http://www.panasonic.com/help
PRXA10_IM_(en-en)_0107_ver.110.pdf
Remove the handset's cover.
Open the microSD card cover by
sliding it toward the nearest side
of the handset (A) and then lifting
up (B).
Insert the microSD card with the
gold-colored contacts facing
down, close the microSD cover
(A), and then gently slide the
cover toward the opposite side of
the handset (B).
Insert the battery (A) and lower it
into the handset (B).
Attach the cover.
3
Installation
B
A
A
B
A
B
3
2014/01/07
20:02:18
Advertisement
Table of Contents
