Table of Contents
Advertisement
Quick Links
6-F Specifications
■ Base unit
Power Supply:
Power Consumption:
Frequency:
Dimensions (H x W x D):
Mass (Weight):
■ Handset
Power Supply:
Frequency:
Dimensions (H x W x D):
Mass (Weight):
Security Codes:
■ Operating Environment:
Specifications are subject to change without notice.
For your future reference
Serial No.
(found on the bottom of the unit)
Name and address of dealer
Attach or keep original receipt to assist with any repair under warranty.
Panasonic Communications Co., Ltd.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
Operating Instructions
KX-TC2000ALF/KX-TC2000ALS
KX-TC2000ALW/KX-TC2000NZB
KX-TC2000NZF/KX-TC2000NZW
KX-TC2000ALB
AC Adaptor (230-240 V AC, 50/60 Hz)
Standby:
Maximum:
30 MHz – 39 MHz
Approx. 80 mm x 125 mm x 210 mm
Approx. 300 g
Ni-Cd battery (3.6 V, 300 mAh)
30 MHz – 39 MHz
Approx. 278 mm x 54 mm x 40 mm
Approx. 190 g
65,000
5 ˚C – 40 ˚C
KX-TC2000ALB
Model No.
PLEASE READ BEFORE USE
AND SAVE.
Charge the battery for about
15 hours before initial use.
Contents by Section
1 Getting Started
2 Making/Answering Calls
3 Speed Dialler
4 One-Touch Dialler
5 Special Features
6 Things You Should Know
Approx. 5 W
Approx. 7 W
Date of purchase
PQQX13660ZA S0403-0
Cordless Phone
Advertisement
Table of Contents
Related Manuals for Panasonic KX-TC2000ALB
Summary of Contents for Panasonic KX-TC2000ALB
-
Page 1: Operating Instructions
Serial No. (found on the bottom of the unit) Name and address of dealer Attach or keep original receipt to assist with any repair under warranty. Panasonic Communications Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Operating Instructions Model No. -
Page 2: Getting Started
Hooks Extend the antenna fully. •USE ONLY WITH Panasonic AC ADAPTOR PQLV16AL. •The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) •This unit will not function during a power failure. If you want to connect a standard telephone on the same line;... -
Page 3: Making/Answering Calls
Making/Answering Calls 2-A Making Calls (TALK) and Indicator (REDIAL) (LOUD) (CH) 2-B Answering Calls (TALK) and Indicator (RINGER) Press (TALK) •The TALK indicator lights. •If an alarm tone sounds, see 6-D. Dial a phone number. To hang up, press or place the (TALK) handset on the base unit. -
Page 4: Speed Dialler
Speed Dialler 3-A Storing Phone Numbers in Memory You can store up to 10 phone numbers. The dialling buttons ((0) to (9)) function as memory stations. The TALK indicator light must be off before programming. (AUTO) TALK Indicator Memory Station Numbers (PAUSE) (PROGRAM) - Page 5 3-B Dialling a Stored Number (TALK) and Indicator (AUTO) Memory Station Numbers 4-B Dialling a Stored Number in the DIRECT Button (DIRECT) (TALK) and Indicator Press (TALK) •The TALK indicator lights. Press (AUTO) •The TALK indicator flashes. Press the memory station number •The stored number is dialled.
-
Page 6: Special Features
Special Features (TALK) and Indicator (AUTO) (RECALL) (PAUSE) (PROGRAM) IN USE/CHARGE Indicator (HANDSET!LOCATOR) 5-A Handset Locator You can locate the handset or page the handset user with beep tones. Press (HANDSET!LOCATOR) on the base unit. •The IN USE/CHARGE indicator flashes and the handset beeps for 1 minute. To stop paging, press (HANDSET!LOCATOR) again or press (TALK) twice on the handset. -
Page 7: Things You Should Know
RECHARGE indicator flashes, the battery needs to be replaced. Replace the battery with a new Panasonic P-P301 (KX-A36A) battery. See section 1-C, step 2. When replacing the battery, programmed information may be erased. Reprogram if necessary. -
Page 8: D Troubleshooting
Please phone Panasonic on 132600 for assistance. For New Zealand Customers Panasonic New Zealand operates a toll free Customer Support Centre. Please phone 0800 Panasonic (0800 726276) for assistance. 5) The maximum calling distance may be shortened when the unit is used in the following places: Near obstacles such as hills, tunnels, undergrounds, near metal objects such as wire fences, etc.