Panasonic KX-TC1230ALW, KX-TC1230NZW Operating Instructions Manual page 80

Before Requesting Help
Problem
Previously programmed
information is erased.
"Recharge" is displayed on
the handset, "
or the unit beeps
intermittently.
You charged the battery
fully, but "Recharge" is still
displayed and/or "
continues to flash.
The IN USE/CHARGE
indicator light does not go
out after the battery has
been charged.
For New Zealand Customers
Panasonic New Zealand operates a toll free Customer Support
Centre.
Please phone 0800 Panasonic (0800 726276) for assistance.
80
•If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
•Charge the battery fully (p. 14).
" flashes
•Clean the charge contacts and charge
again (p. 15).
•Install a new battery (p. 74).
"
•This is normal.
Remedy