Panasonic TC-P60VT60 Service Manual page 21

9.2.10. Remove the A-Board
1. Unlock the hooks and the tapes to free the cables.
2. Disconnect the connectors (A1, A6, A8A and A12).
3. Disconnect the USB cables (JK8605 and JK8607).
4. Disconnect the flexible cables (A20, A31, A32 and A33).
5. Remove the screws (×4
6. Remove the Side shield metal and the Bottom shield
metal.
7. Remove the A-Board.
8. Remove the screws (×5
9. Remove the Heatsinks (bottom-1, -2), the Thermal
conductive sheets and the Heat rubber.
).
).
9.2.11. Remove the Control unit assy
1. Unlock the tape to free the cables.
2. Disconnect the connector (C14).
3. Remove the claws (×2
assy.
9.2.12. Remove the Speaker SQs
1. Unlock the hooks and the tapes to free the cables.
2. Remove the screws (×6
Speaker covers (L, R).
3. Disconnect the Relay connector.
4. Remove the screws (×2
Speaker SQs (L, R).
21
) and remove the Control unit
each) and remove the
each) and remove the