Page 1
Setup Guideline first. http://support.hornington.com/kb/question.php?ID=624 (PPPoE): Hardware Setup of WCR-GN Router 1. Power on Buffalo Router, and wait about 1 minute until the “Diag” 3. Please connect your broadband service with a network cable modem) to the “Internet” port on the ROUTER.
Page 2
WCR-GN Firmware Version: WCR-GN Ver.1.04 (R4.20/B1.13) / WCR-HP-GN Ver.1.00 (R0.06/B1.13) Router Setting (For: PCCW, HGC PPPoE User) Buffalo Router WCR-GN Internet Connection Setup: “Run the Internet Connection Wizard (Easy 5. Press Setup)” 4. Launch Web Browser, enter http://192.168.11.1 in address bar and then “root”,...
Page 3
WCR-GN Firmware Version: WCR-GN Ver.1.04 (R4.20/B1.13) / WCR-HP-GN Ver.1.00 (R0.06/B1.13) Router Setting (For: PCCW, HGC PPPoE User) 7. After a few moments, the following page will be displayed and asking for “Username/Password”. Please input the login username (e.g. xxxx@netvigator.com or xxxx@hgcbroadband.com) password (twice) of your broadband service now.
Page 4
WCR-GN Firmware Version: WCR-GN Ver.1.04 (R4.20/B1.13) / WCR-HP-GN Ver.1.00 (R0.06/B1.13) Router Setting (For: PCCW, HGC PPPoE User) 10. Choose “Internet/LAN” 11. Click “Wireless Config” On “Internet” Page “Use PPPoE Under page “WPS”, please “Enable” option behind Choose Client” behind the UNCHECK “Method of Acquiring IP “WPS”...
Page 5
WCR-GN Firmware Version: WCR-GN Ver.1.04 (R4.20/B1.13) / WCR-HP-GN Ver.1.00 (R0.06/B1.13) Router Setting (For: PCCW, HGC PPPoE User) “Basic 12. Click (11n/g/b)” Page, “Wireless “Auto Behind Channel”, Please do not use Channel”, Choose 1, 6, 11, or another channel the “Use” at “SSID2”. Please uncheck “Apply”...