Advertisement
Peripherals
Twisted-Pair-Cable Receiver Board
• The Twisted-Pair-Cable Receiver Board makes it possible, using a
single CAT5e cable, to simultaneously send video signal
(RGB, component, or composite), audio signal and the PDP control
signal.
* To send a composite video signal, the Composite Video Terminal Board
(TY-42TM6Y, 42TM6B or 42TM6V) must be mounted in the slot of PDP.
• This reduces both costs and setup time compared with a
conventional BNC cable connection.
• XGA signals (1024 x 768 pixels) can be sent up to 150 m.
• Because the Twisted-Pair-Cable Receiver Board mounts in a multi-
function slot, it runs on power supplied by the PDP and takes up no
additional equipment space.
For the latest information on the Twisted-Pair-Cable Receiver Board,
please visit the following website:
http://www.kowa.co.jp/i-master/cat5-eng
PC
DVD, VCR
or
Twisted-Pair-Cable
Transmitter
KE0202CT2W
Simultaneous multi-signal
transmission using a
Transmission distance (approx.)
single CAT5e cable
UXGA
100 m
SXGA
120 m
XGA
150 m
SVGA
180 m
VGA
200 m
Twisted-Pair-
Cable Receiver Board
Mounted in slot of the
PDP's rear panel.
* Some peripherals are not available in some countries. Consult your local sales company for details.
KE0101CRBW
(Video, audio and PDP control signals) (Mounts in any slot*)
* Should be mounted in slot 1 to send the PDP control signal.
PDP control signal transmission is one-way.
Specifications (KE0101CRBW)
Applicable displays
Panasonic Plasma Displays
Input channel
1 input system for extension
Output channel
1 system (internal connector) for RGB
or 1 system (extrenal connector) for Video,
1 system for sound and 1 system for RS232C
Extension cable
CAT5/CAT5e/CAT6
Video output signal
Analog RGB: 0.7Vp-p (75 ohms); HD, VD: TTL
Component: Y: 1.0Vp-p (75 ohms) sync signal included
: ± 0.35Vp-p (75 ohms)
P
, P
B
R
Video: 1.0Vp-p (75 ohms)
Power supply
Supplied from the plasma display
Power consumption
Approx. 6 W
Specifications (KE0202CT2W)
Input channel
1 each for video (RGB and video)
1 each for audio and 1 for RS-232C
Output channel
1 each for monitor output (RGB, video, and audio)
Video signal
1 for extension output (2 division)
+
1 for extension output (2 division)
Extension cable
CAT5/CAT5e/CAT6
Audio signal
Video output signal
Analog RGB: 0.7Vp-p (75 ohms); HD, VD: TTL
+
Component: Y: 1.0Vp-p (75 ohms) sync signal included
PDP control signal
: ± 0.35Vp-p (75 ohms)
P
, P
B
R
Video: 1.0Vp-p (75 ohms)
Power supply
AC 100 — 240 V, 50/60 hz
Power consumption
Approx. 10 W
Specifications (KE0108CHDW)
Input channel
1 input for CAT5e
Output channel
8 outputs for CAT5e
Input connector
RJ-45 connector
Output connector
RJ-45 connector
Extension cable
CAT5e
Networked MPEG2 Player
• Mounts in the function slot to reduce wiring and save space. The local
remote control allows playback control without the need for a mouse
and keyboard.
• Video signals are transmitted digitally to ensure crisp, clear images.
• The hardware decoder produces DVD-level image quality by supporting
MPEG2 MP@ML (Main Profile@Main Level) transport. High-bit-rate data
also streams smoothly because all playback data is first stored in the
built-in hard disk.
• Combination with the BB-SMG700 Streaming Box Manager makes it
possible to schedule the distribution of motion video, still images and
other content, and deliver over a LAN or Internet.
An information distribution system consisting of the BB-S700PD and
BB-SMG700 allows the following operations and more:
• Data/content control • Schedule production and control
• Data distribution • Terminal control
BB-S700PD
Streaming Box
(Mounts in slots 1 & 2)
PDP Controller
• Function board design reduces wiring and saves space.
• Clear images made possible by digital connection using the
function slot of the plasma display.
• Customised to maximise the performance of Panasonic plasma displays.
- Realistic display images achieved by a 1:1 pixel correspondence with
Panasonic plasma displays.
- Can also be used in vertical display applications.
• Models with a pre-installed, digital signage system are also available.
• Easy to install, it requires only a network and power connection.
The mouse/keyboard connections can be wireless, through the
PCMCIA slots.
VC250 series
(Mounts in slots 1, 2 & 3)
16
Terminals
Audio Out LAN jack
Specifications
Applicable displays
Panasonic Plasma Displays
HDD capacity
Approx. 20 GB*
1
External jacks
10BASE-T/100BASE-TX (RJ-45), Audio output (Stereo mini jack*
Power supply
Supplied from plasma display (DC 14V)
Power consumption Approx. 14V/0.7A max.
Web browser
HTML4.01 subset, partial CSS1 and CSS2
ECMA Script 262 3rd edition (JavaScript 1.5 equivalent)
Partial DOM Level 1, Level 2 and Dynamic HTML
Applicable servers
Streaming Box Manager BB-SMG700*
3
Data distribution
Proprietary method (block data distribution with error-triggered retransmission function
protocol
and encoding process)
Image
MPEG2 PS, MPEG2 TS, MP@ML
4
Audio
Linear PCM*
, MPEG Audio Layer 1, Layer 2
Maximum bit rate
10 Mbps (in storage and playback)
*1: Part of this capacity is used by the system. *2: Exclusive use with internal connection.
*3: Some functions are performed jointly with the BB-SMG700. *4: At sampling frequency of 48kHz.
BB-SMG700
Streaming Box Manager
Controls up to 100 plasma display panels.
This application contains all of the functions necessary for video
distribution.
BB-SMG700 Operating Environment
CPU
Pentium
®
IV 1GHz or faster, Recommended: Pentium
Main storage memory
512MB or more, Recommended: 1 GB or more
HDD capacity
Required capacity: 10 GB or more
Network interface
1000BASE-T/100BASE-TX/10BASE-T
Applicable OS
Windows
®
XP Professional (SP1)
Direct playback is also possible
using the included remote control.
Terminals
PC slot
MIC
LINE OUT
LINE IN
connector
connector
connector
Specifications
Applicable displays
Panasonic Plasma Displays
CPU
ULV Pentium
®
M 900MHz
Main storage memory
Standard 256MB DDR SO-DIMM
Internal HDD
2.5" HDD 30GB x 1
Network
100BASE-TX/10BASE-T x 1, Wake On LAN supported
1
2
Interfaces
Serial x 2*
, USB2.0/1.1 x 2*
, Line In x 1, Line Out x 1, MIC x 1
PCMCIA slot
2*
3
Preinstalled OS
Windows
®
XP Embedded
Dimensions
315 (W) x 29 (H) x 211 (D) mm (including cooling fan)
Weight
1.2 kg
Power supply
Supplied from the plasma display
Power consumption
20 W max.
Standard
FCC Class A
*1: One serial interface is connected internally.
*2: USB 1.1 is for HID (human interface devices) only. Maximum power supply for the two ports is 3.5 W.
*3: Maximum power supply for the two slots is 2.0 W when using 5.0 V, and 3.6 W when using 3.3 V.
Status indicator
2
)
®
IV 2.4GHz or faster
100BASE-TX/
Serial port
USB 2.0
10BASE-T
(RS232C)
connector
connector
17
Advertisement
