Kenwood DNX8160S Instruction Manual page 75

Setting Up
Learning function of steering
remote
This function is available only when your
vehicle is equipped with the electrical
steering remote controller.
If your steering remote controller is not
compliant, learning may not be completed
and error message may appear.
1
Touch [Steering Remote Controller] in
the User Interface screen.
Steering Remote Controller Setting screen
appears.
2
Press and hold the steering remote
controller button you want to set the
function.
NOTE
• You can have the unit learned all buttons at
a time. In that case, press the all buttons one
at a time and after pressing all of them, touch
[Learning completed] in Steering Remote
Controller Setting screen.
However, new functions cannot be learned after
this operation.
3
Touch the function you want to set.
4
Repeat steps 2 and 3 as necessary.
5
Touch [Learning completed].
74 74
NOTE
• When changing the function already learned,
press and hold the button you want to change
in step 2 and then touch to select the changed
function from the function list.
• Confirm the contents of the settable function on
the function list. You cannot edit the function list.
• To initialize the contents, touch [Learning
initialization] of [Steering Remote Controller] in
User Interface screen. After you touch [Initialize],
a confirmation message appears. Follow the
message and complete the operation.