Basic Operation - Rockford Fosgate RFX4000 Operation Manual

RADIO OPERATION /AUX
Radio Operation
Listening to the radio
Press the MODE (4) button and select the radio mode, the frequency appears
in the display.
Press the BAND (8) button and select the radio band FM1~FM2~FM3~AM1~AM2.
Tuning
There are 3 types of tuning mode available: SEEK tuning, MANUAL tuning and
Preset
stations.
Auto Seek a Station
Press the BAND (8) button and select the desired band (FM or AM).
Press or to start to seek a station.
Manual Tuning
Press the or button longer than 2s,
Storing a Station
Select a band (if needed), then select a station.
Press and hold a Preset button 1-6 for more than 2 seconds, the current station
will be stored to the number.
Automatic Tuning Control (SCAN) (9)
In radio mode, press SCAN button to scan stations, the unit will pause for 5 seconds
at each strong radio station. At the desired station press the SCAN again to stop
scanning.
A/PS(7)
Short press A/PS button, the unit will scan stored stations in the current band,
it pauses for 5 seconds at each preset station.
Long press A/PS button, the unit will search six strong stations and automatically
store them on buttons 1-6.
AUX IN PORT
For iPod, MP3 players, and other portable media players.
will change to manual tuning mode
E11
POWER ON/OFF(1)
Press the button to turn the unit on or off .
SELECT (2)&VOLUME UP/DOWN(3)
Repeatedly press SEL button to select
ID3→VOL, then you can use the VOL +/- button to change the setting.
Long press SEL button to enter zone selection, and short press it again repeatedly
to select channel switch, Beep setting, trigger 1/trigger 2 setting, press the
VOL + / - to change the settings.
a ZONE: AMERICA / EUROPE / CHINA .
b STEREO/MONO SWITCH: FM mode.
c Beep : Activate Beep on/off.
d TRI 1 : Activate Trigger 1(12V_1) on/off.
e TRI 2 : Activate Trigger 2(12V_2) on/off.
.
Adjust back light(MENU) (16)
By pressing MENU key more than 2s , you can adjust back light.(25%,100%)
DISPLAY (DISP) (5)
Press DISP button once to display the system time on the LCD.
a. Press and hold DISP button until hour digit starts blinking, use
adjust hour.
b. Press DISP again, minute digit starts blinking, use
MODE button (MODE) (4)
Press to switch mode: SIRIUS/CDC/AUX/TUNER/DIGI PORT/USB
LCD display (17)
Display the current state of the unit.
Low Voltage Warning
When the power supply drops down to 10V, it will display BATTERY LOW
on LCD and beeps for 1 minute, the black box will be turned off automatically
in 1 minute.
LOCK THE CONTROL PANEL
Press and hold "SEL" (2)and "DISP"(5) buttons together for 3 seconds
to lock the RFX-MR5BB control panel, the Black Box will not response the button
press on the panel when the panel is locked. Press and hold "SEL" and "DISP"
buttons for 3 seconds again to unlock the RFX,MR5BB control panel.

BASIC OPERATION

BAS→TRE→BAL→FAD→SUB→EQ→
/ to
/ to adjust minute.
/SD/BT
" "
E6
.