Stopping The Engine - Toro GrandStand 74549 Operator's Manual

Figure 16
7. Turn the ignition key to the Start position (Figure 14).
When the engines starts, release the key.
Important: Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, allow a 15 second cool-down period between
attempts. Failure to follow these instructions can
burn out the starter motor.
Note: Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
Figure 17
1. Off position
2. Run position
G008947
3. Start position

Stopping the Engine

CAUTION
Children or bystanders may be injured if they
move or attempt to operate the tractor while it is
unattended.
Always remove the ignition key and set the parking
brake when leaving the machine unattended, even
if just for a few minutes.
Let the engine idle at slow throttle (turtle) for 60 seconds
before turning the ignition switch off.
Important: Make sure the fuel shut-off valve is closed
before transporting or storing the machine, as fuel
leakage may occur. Before storing the machine, pull
wire off spark plug(s) to prevent possibility of accidental
starting.
19
Figure 18