Advertisement
Assembly / Operating Instructions
Restraints - Harness
1.
To secure the child in the harness, place left
hand buckle prong (b) on top of (a).
2.
Hold both left hand buckle prongs (a) and (b)
together and insert it into buckle housing (e)
until it snaps into position.
3.
Repeat previous steps for right hand buckle
prongs (c) and (d).
4.
Once all attached, carefully adjust the harness
straps by pulling each slider (f) until the desired
fi t is achieved in the lap, shoulder and crotch
straps.
5.
To release the buckles, squeeze the top and
bottom prongs (a) and (b), (c) and (d) together
until harness disengages.
CAUTION: Always adjust the harness when
changing the seating position of the child.
To adjust backrest
1.
To lower the front seat backrest, lift backrest adjusting lever by
using thumb and forefi nger, lower to desired position. To raise,
simply push backrest up.
2.
To lower the rear seat, press button on buckle and pull down
to desired position. To raise the seat upwards, hold the strap in
one hand and pull buckle up.
f
a
f
b
f
(a), (b): Left hand buckle prongs
(c), (d): Right hand buckle prongs
(e): Buckle housing
(f): Strap adjustment sliders
f
c
e
f
d
9
Advertisement
