Table Of Contents Important Safety Instructions ............................2 View of Unit ..................................4 Front Panel and Right Side Panel ..........................4 Rear Panel ..................................5 Remote Control ................................6 Remote Control Drawing ............................. 6 Preparation of Remote Control ..........................8 Using of Remote control ..............................
Important Safety Instructions Thank you for choosing our product. Please read this manual carefully and observe all safety and operating instructions. Store the manual in a safe place for later reference. This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit.
Page 4
Important Safety Instructions NOTES: Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use near water. Clean only with dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on a bed, sofa or anything that blocks ventilation. Install according to the manufacturer’s instructions.
View of Unit Front Panel and Right Side Panel TFTV4055FL/TFTV4255FL TFTV4055M/TFTV4255M EJECT PLAY 1. Remote Sensor Remote sensor window for the remote control. 2. Power indicator In active mode, it is green; in standby mode, it turns red. POWER button Press to switch on or off the device (enter or exit the standby mode).
View of Unit Rear Panel HDMI3 HDMI1 USB Port Connect the USB device. COMPONENT IN Jacks( Y/P /P Connecting for the Y/P /P input in YPbPr mode. COMPONENT shares the same audio jacks with COMPOSITE. HDMI1/2/3 Input Jacks Connecting for HDMI signals. Earphone Jack When earphone is inserted, the loudspeaker is switched off.
Remote Control Remote Control Drawing 7. Direction buttons (▲▼◄►) In the setup menu, press the ▲▼ button to select a desired item and press the ◄► button to adjust or set. OK button Press to confirm selection in the setup menu.
Page 8
Remote Control 16. SUBTITLE button In teletext mode, it is the teletext color button. In DTV mode, press to select alternate In DVD mode, press the button subtitle languages during view/playback repeatedly to shift the repeat modes. of a DTV program. Other defined functions on the OSD 17.<...
Remote Control Preparation of Remote Control Using of Remote control Softly push the back cover to open the Do not point bright lights battery compartment. directly at the remote control Insert two batteries (1.5V, size AAA), sensor. please make sure the polarity matches ...
System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the color code when connecting audio and video cables. Connecting to the Power Supply Connect the plug of the power cord on the rear panel of the unit to the AC100~240V wall outlet. Connecting a USB Device This unit is designed with a USB port so that you can connect your USB device for media play, record or...
System Connections Connecting an External Equipment to COMPONENT IN Connect the white / red audio cables for sound from the audio (L/R) output jacks on your external equipment to the COMPOSITE L / R input jacks on the TV's rear panel. AV signal source Use a component cable (not supplied) to connect an external AV signal...
System Connections Connecting to Coaxial Digital Output This unit is designed with a coaxial digital audio jack, can be connected to the digital amplifier, see the figure below. DIGITAL AMPLIFIER This feature is available only for amplifiers equipped with coaxial digital audio input connectors.
System Connections Connecting to Earphones Connect earphones (headphones) to the earphone jack on the rear panel of the unit for listening to the audio output in seclusion. The internal speakers output will turn off automatically after the earphones have been connected. Excessively loud volume could damage your hearing.
Basic Operation Turning the TV On and Off ² Connect the power adaptor to wall AC Outlet. A front mounted indicator light will be illuminated red indicating the TV has power. ² Press the POWER button on the remote control or the TV set. The TV's indicator light will be illuminated green indicating the TV is turned ON.
! PC — Watch the signal from the VGA input terminal. Media — Watch the media source from the USB. DVD — Watch the media source from the DVD. Note: TFTV4055FL/TFTV4255FL has no DVD function. Press OK button to confirm the selection. Channel Selection Using CH+/- button Use the CH.LIST button to display the channel list and press the ▲▼...
TV Operation and System Setup Picture Setting PICTURE setting includes Picture Mode, Brightness, Contrast, Sharpness, Colour Tint, Colour Temperature and Aspect Ratio. Picture Mode Press the ▲▼ buttons to select Picture Mode and then press OK or ►button, the available picture modes will be listed on the screen.
TV Operation and System Setup Sound Setting The sound settings include the options for Sound Mode, Bass, Treble, Balance, Surround, AVL and SPDIF. Sound Mode Press the ▲▼ buttons to select Sound Mode and then press OK or ►, the available Sound Modes will be listed on the screen.
TV Operation and System Setup Channel CHANNEL includes Channel Management, Favorite Management, Country, Auto Search, DTV Manual Search and ATV Manual Search. NOTE: The Channel category is only active in DTV and ATV mode. When in DTV mode, the ATV Manual Search is not available;...
Page 19
TV Operation and System Setup Favorite Management In the Favorite Manager, there are four groups of your favorite programs: Fav1, Fav2, Fav3 and Fav4. With the ▲▼ buttons select a program and press the different coloured button to set it in different group. Press red coloured button to set it in group Fav1.
TV Operation and System Setup ATV Manual Tuning 1. Press the ▲▼ buttons to select ATV Manual Search and press the OK or ► button to enter the submenu. The screen will display as shown on the right: 2. Press the ▲▼ buttons to select desired item, press the OK or ►...
Page 21
TV Operation and System Setup Language Press the ▲▼ buttons to select language and press the OK or ► button to enter the submenu. In the submenu, you can select your desired OSD Language, Preferred Subtitle, Preferred Audio, DTV Teletext Language and ATV Teletext Language. Clock Press the ▲▼...
Page 22
TV Operation and System Setup Partition Select Select a disk to store the recorded file. Press the ▲▼ button to select Partition Select and press the OK button to prompt a sub-menu. Press RED button to enter a dialog box and then select OK to format your USB memory device.
TV Operation and System Setup Setup The Setup category includes the options for OSD Timer, PC Setup, Blue Screen, Home Mode, Reset TV Setting and Software Upgrade. . OSD Timer This option is for setting the OSD time out. Press the ▲▼ buttons to select OSD Timer and press he OK or ► button to enter the OSD timer list.
PVR Function In DTV Mode Only PVR function allows the unit to record live DTV program and make it available for reviewing at any time. NOTES: When PVR function is in progress, please don’t unplug the power and the external USB device at will.
PVR Function Playing recorded program You can play the selected program in the Recorded List. Press the REC.LIST button on the remote control to enter the Record List, as shown right: Press the ▲▼ button to select desired record file and press OK to play it.
EPG Function In DTV Mode Only The electronic program guide (EPG) can be activated by pressing the EPG button as well and the EPG window appears on the screen. Press the red coloured button on the remote to change the EPG mode between Daily and Weekly.
TELETEXT Function Teletext is a free service broadcast by most TV stations which provides up-to-the-minute information on news, weather, television programs, stock prices and many other topics. The teletext decoder of this TV can support the SIMPLE and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
NICAM Function The unit supports NICAM function. Under NICAM TV broadcast: 1. When receiving stereo audio signals, press the NICAM/A2 button on the remote control repeatedly to select the sound tracks between NICAM STEREO and Mono, the screen will show the corresponding display as shown below: 2.
Media Playback This unit is designed with a USB ports so that you can connect your USB device and playback the files in the USB device. NOTES: The recognition speed of a USB storage device may depend on each device. ...
Media Playback 3. In the Music submenu as shown right, press the▲▼ direction button to select your storage device and press the OK button to open it. The songs list will appears. 4. In the songs list, you can use the ▲▼buttons to select one of them and press the red coloured button on the remote to delete it;...
DVD Playback Operation Discs Supported DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) Audio + Video 12cm (active picture) 266min(DS-SL) 484min(DS-DL) Audio 12cm 74min JPEG Still high resolution 12cm NOTES: The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc.
Page 32
DVD Playback Operation This unit is designed with a disc slot so that you can playback the files on the disc. NOTES: Select DVD mode before insert disc. Use of poor quality discs could result in damage to the TV set. ...
Page 33
DVD Playback Operation D.SUB view the scene from different angles, for The DVD player can support multiple kinds of example, front, side, whole view and exterior subtitles. When you play a multi-subtitle disc scene. you can press the D.SUB button on the D.GOTO remote control to select different subtitles.
DVD System Setup In DVD mode only. Press the D.SET button to display the DVD setup menu. It includes different categories, such as General, Audio, Dolby, Video and Preference. You can change the category using the ◄► buttons and press OK button to enter it. ...
Page 35
DVD System Setup Sharpness Press the OK or ► button to enter the submenu. Use the ▲▼ buttons to select your desired option. Brightness Press the OK or ► button to enter the submenu. Use the ◄► buttons to adjust the brightness.
Troubleshooting SYMPTOM CHECK ITEM Make sure the system connection is correct. Make sure the speakers are not muted. There is no sound. Set the correct sound mode. Is your disc dirty or warped? If so, clean or replace it. Make sure the unit is turned on and the connections are LED has no display.
Specifications Model TFTV4055FL/TFTV4055M TFTV4255FL/TFTV4255M Screen Size 40-inch LED 42-inch LED Native Resolution 1920 ×1080Pixels 1920 ×1080Pixels Brightness 220cd/m 220cd/m Contrast Ratio 4000:1 4000:1 Response time (ms) 8.5 ms 9.5 ms T eletext 1000 pages 1000 pages Speaker Output 6W+6W 8W+8W Power Consumption <...
Page 38
Palsonic Customer Service Telephone (Australia) 1300 657 888 Palsonic C ABN 34 000 474 108 1 Joynton Avenue, Waterloo NSW 2017 Australia Telephone (02) 9313 7111 Facsimile (02) 9697 0655 www.palsonic.com.au 5944041610...