Philips HR1899 Manual page 10

ENGLISH
10
Disassembling and cleaning the juicing unit
1 Remove the pusher from the feeding tube (Fig. 21).
2 Remove the berry tray from the feeding tube (Fig. 22).
3 Turn the juice collector anticlockwise until the arrow ( Á) points to the 'open' indication and
remove it from the juicing unit. (Fig. 23)
4 Remove the two-part filter and disassemble it (Fig. 24).
5 Remove the juicing screw (Fig. 25).
6 Turn the pulp outlet anticlockwise until the arrow ( Á) points to the 'open' indication and
remove it from the juicing unit. (Fig. 26)
Storage
1 Wind the mains cord around the cord storage facility in the base of the motor unit (Fig. 27).
2 You can store the pusher, the juice jug and lid, and the berry tray in the pulp
container (Fig. 28).
Recycling
- This symbol on a product means that the product is covered by European Directive 2012/19/EU.
Inform yourself about the local separate collection system for electrical and electronic products.
Follow local rules and never dispose of the product with normal household waste. Correct
disposal of old products helps prevent negative consequences for the environment and human
health (Fig. 29).
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips
dealer. You can also contact the Philips Consumer Care Centre in your country.
Guarantee and support
If you need information or support, please visit www.philips.com/support or read the separate
worldwide guarantee leaflet.
Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance.
If you are unable to solve the problem with the information below, visit www.philips.com/support
for a list of frequently asked questions or contact the Consumer Care Centre in your country.