Download Print this page

Getting Started - Pyle PHLHA42 User Manual

Advertisement

Note
Note
Note
■ It is important to follow the instructions (1-3) below for the first two times charging the Rechargeable Sound
Amplifier
1. Slide the switch down located on the back of the earpiece to turn the Rechargeable Sound Amplifier ON/OFF.
2. Connect the adapter's cord into the rechargeable docking station, and then plug the opposite end of the
adapter's cord into an outlet. Upon plugging, the red light on the adapter will shine.
3. Place the Rechargeable Sound Amplifier into the top of the recharging docking station. The green light on the
docking station will turn red if connected properly.
■ Note: DO NOT remove the Rechargeable Sound Amplifier from the docking station until the light turns green
(again) – signaling that it was fully charged.
■ Important: Follow the steps below to ensure longer time.
CAUTION
Rechargeable
Sound Amplifier
is NOT for use
Note
by children
under age 15.
Keep out
of reach of
children
Note
and pets.
The supply
terminals are
not to be
Note
short-circuited

GETTING STARTED

DO NOT WET THE DEVICE
Discontinue use of product in the
event of irritation. It is
recommended that you consult a
doctor before continued use of
this product.
DO NOT remove the Rechargeable
Sound Amplifier from the docking
station until the light turns green
(again) – signaling fully charged.

Advertisement

loading