Advertisement
Quick Links
General Safety and Maintenance Manual
MODEL 46RAS shown with 4" Guard.
Model
Number
46 RA
46 RAS
46 RAC
Case
Material
Steel
or
Aluminum
The henry Tool Co., ManufaCTured by henry Tools
498 so. belvoir blvd., souTh euClid, oh 44121 u.s.a.
Ph: (216) 291-1011 or (800) 826-5257 ● Fax: (216) 291-5949 or (800) 303-2800
Email: daviidh@msn.com ● WEbsitE: WWW.hEnrytools.com
Exhaust Direc-
Throttle
tion
Type
Front
(L) Lever
or
or
Side
(K) Safety
Lever
Weight
Aluminum
Steel
Length
2.8 Lbs
3.5 Lbs
9.1 Inches
(1.3 Kg)
(1.6 Kg)
(231 mm)
PRE-YEAR 2010 MODEL
MODEL 46RAC with 1/4" Collet for use
with mounted points or carbide burrs.
Power
Speed
Output
13000
to 14000
0.9 H.P.
R.P.M (13500rpm
(675 W)
is standard)
Air
Diameter
Consumption
1.6 Inches
25 CFM
(41 mm)
(11.8 L/S)
MODELS
46 RA
46 RAS
46 RAC
46 RASC
Case
Material
Steel
or
Aluminum
Spindle Thread
3/8-24 x 0.98 Inch (25mm)
1/4 Inch Burrs/Mounted Points
Advertisement
Related Manuals for Henry Tools 46 RA
Summary of Contents for Henry Tools 46 RA
- Page 1 (11.8 L/S) 1/4 Inch Burrs/Mounted Points Aluminum The henry Tool Co., ManufaCTured by henry Tools 498 so. belvoir blvd., souTh euClid, oh 44121 u.s.a. Ph: (216) 291-1011 or (800) 826-5257 ● Fax: (216) 291-5949 or (800) 303-2800 Email: daviidh@msn.com ● WEbsitE: WWW.hEnrytools.com...
- Page 2 General Operators Instructions and Service Manual MODELS PRE-YEAR 2010 MODEL 46 RA 46 RAS 46 RAC 46 RASC This tool is designed to operate on 90 psig (6.2 bar) maximum air pressure with 1/4” (8 mm) hose. Do not use a grinder without recommended wheel guard.
- Page 3 General Operators Instructions and Service Manual MODELS 46 RA 46 RAS 46 RAC 46 RASC SAFETY (continued) PART NUMBER DESCRIPTION repair immediately. NEVER MODIFY ANY PART OF THE TOOL OR ACCESSORIES!! 300-G-29 BEARING 320-9R O-RING CUSHION FOR BEARING COVER 320-9-W...
- Page 4 General Operators Instructions and Service Manual MODELS 46 RA 46 RAS 46 RAC 46 RASC PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION 400-2G CYLINDER 592016 SNAP RING 400-3 REAR ENDPLATE 832636 GASKET 400-5 ROTOR 841552 3/8 NPT TO 3/8 NPT BUSHING 400-6 BLADE (5 ARE REQ.)
- Page 5 General Operators Instructions and Service Manual PRE-YEAR 2010 MODEL MODELS 46 RA 46 RAS 46 RAC 46 RASC through bearing until it bottoms on shoulder. PART NUMBER DESCRIPTION Place retaining ring (400-46) into groove in spindle. 1100-662 3/8-24 TO 5/8 I.D. ADAPTER NUT Slide front thrust(400-7 over spindle and onto front bear- ing.
Need help?
Do you have a question about the 46 RA and is the answer not in the manual?
Questions and answers