Table of Contents
Advertisement
format (DTS/Dolby Digital 5.1).
• Select SPDIF PCM to set the digital audio signal output to PCM format.
The DOLBY DIGITAL menu
Dolby digital audio setup
DUAL MONO
In the DUAL MONO area, you can choose:
• STEREO: for stereo
• L-Mono:
channel only.
• R-Mono: right channel only.
• Mix-Mono: the average of both the
DYNAMIC
• Select the value for the dynamic range compression to avoid losing
sound details
The VIDEO menu
Video setup page
COMPONENT
• Cvbs: Select this format when the Composite video output is used.
• YUV: Set the video output in analog component video format.
RESOLUTION
• Select the desired
QUALITY
Set the video quality.
• SHARPNESS: Adjust the screen sharpness.
• BRIGHTNESS: Adjust the screen brightness.
• CONTRAST: Adjust the contrast of the image.
• GAMMA: Adjust the colour intensity.
• HUE: Adjust the colour intensity.
• SATURATION: Adjust the
HDMI SETUP
• HDMI: select ON / OFF to turn HDMI on /
and right channel.
from a low volume.
of the image.
15
Advertisement
Table of Contents
