Features; Control Locations; Cooling Only Model - LG W081CA SG2 Service Manual

Hide thumbs Also See for W081CA SG2:
Table of Contents

Advertisement

1.4 FEATURES

• Designed for COOLING ONLY.
• Powerful and whispering cooling.
• Slide-in and slide-out chassis for the simple
installation and service.
• Side air-intake, side cooled-air discharge.

1.5 CONTROL LOCATIONS

1.5.1 COOLING ONLY MODEL

• VENTILATION
The ventilation lever must be in the CLOSE position
in order to maintain the best cooling conditions.
When a fresh air is necessary in the room, set the
ventilation lever OPEN position.
The damper is opened and room air is exhausted.
• THERMOSTAT
Thermostat will automatically control the temperature
of the room. Select a higher number for a cooler
temperature in the room. The temperature is selected
by positioning the knob to the desired position.
The 5 or 6 position is a normal setting for average
conditions.
• OPERATION
Off
- Turns air conditioner off.
Med Fan - Med speed fan operation without cooling.
Low Fan
- Low speed fan operation without cooling.
High Cool - Cooling with high speed fan operation.
Med Cool - Cooling with med speed fan operation.
Low Cool - Cooling with low speed fan operation.
• OPERATION
Off
(
) :Turns the air conditioner off.
Low Fan
(
) :Permits the low fan speed operation
without cooling (heating).
Low Cool
(
) :Permits cooling with the low fan
speed operation.
High Cool
(
) :Permits cooling with the high fan
speed operation.
Low Heat
(
) :Permits heating with the low fan
speed operation.
High Heat
(
) :Permits heating with the high fan
speed operation.
• Auto Swing (For R1403/WR1210)
On: Air Swing is operated while operation knob is set to
the Cool position
Off: Stops the operation of air swing.
• Built-in adjustable THERMOSTAT
• Washable one-touch filter
• Compact size
• Reliable and efficient rotary compressor is equipped.
CLOSE
5
4
6
3
2
1
Thermostat
Warmer
Cooler
Thermostat
A slight heat odor may come from the unit when
first switching to HEAT after the cooling season
is over.
This odor, caused by fine dust particles on the
heater, will disappear quickly.
—8—
VENT
OPEN
Med
Fan
7
8
Low
9
Fan
Wait Three Minutes
Low Cool
Before Restarting
Operation
BEFORE RESTARTING
Operation
WAIT THREE MINUTES
Off
High
Cool
Med
Cool

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents