Download Print this page

Xiaomi Yi Instruction page 5

Car recorder

Advertisement

Shutdown: Press Setup / Power button (at low battery status indicator will display red)
State of charge the boot: 10 seconds delay after power automatic shutdown
(2) setting
When turned on, press Settings / Power button to enter the setup menu
Image Quality: The default 1920 x 1080 / 30FPS, continuously press the "OK" button, you can
switch the 1920 x 1080 / 30FPS, 1920 x 1080 60FPS, 2340 x 1296P 30FPS.
Recording: Press the "OK" button to turn on or off Recording
Collision Detection: Default is intermediate sensitivity, click on the "OK" button, you can switch
sensitivity
ADAS: Press the "OK" button to turn on or off ADAS driver assistance functions. In the clear
marking and speed 50-90KM / H state, the effect is better.
WIFI: Press the "OK" button to turn on or off WIFI
Format card: Press the "OK" button to format the memory card, remove all records.
(3)Emergency Record
A.The next turned on, press the "economic Camera" button to automatically save the current
photograph, colleagues emergency start 10 seconds video of the process would have been top of
the screen red dot flashing red precision bottom bar will reduce over time, not less;
B.After the recording is finished, the progress bar hours before the key automatically with up to
10 seconds of loop recording, consisting of up to 20 seconds of emergency recording, then return
to the normal state.

Advertisement

loading