Related Manuals for Cordex TC7150
Summary of Contents for Cordex TC7150
- Page 1 USER MANUAL TC7150 INTRINSICALLY SAFE THERMAL IMAGING CAMERA 800.561.8187 information@itm.co www. .com...
-
Page 2: Table Of Contents
RFID Analysis Settings Parameters Level/Span Storing And Analysing Images TC7150 is certified MET laboratories, inc to the following standards: Technical Information Certification ANSI/ISA-12.12.01-2013: Nonincendive Electrical Equipment for • Ten Suggestions For Thermography Best Practice Use in Class I Division II Groups A,B,C,D Locations. -
Page 3: Getting To Know Your Tc7150
TC7150 – Intrinsically Safe Thermal Imaging Camera GETTING TO KNOW YOUR TC7150 Neck Strap Points Wrist Strap Points Image Save Menu Key Level + RFID Scanner USB Connection Point Power Switch Span + Level - Focus Ring 135˚ Swivel Lens... -
Page 4: Getting Started
TC7150 – Intrinsically Safe Thermal Imaging Camera GETTING STARTED A GUIDE TO CHARGING YOUR TC7150 Rechargeable/Removable Battery Check the contents of your TC7150. For comparative thermography, do not Remove the battery from the battery The shipping case should include the amend the emissivity setting and leave this compartment of the camera. -
Page 5: A Guide To Your Home Screen
TC7150 – Intrinsically Safe Thermal Imaging Camera A GUIDE TO YOUR FOCUS HOME SCREEN • Correct focus is critical in producing an effective thermal image. Slowly rotate the RFID Tag Status Bar knurled orange Focus Ring on the front of the lens until the object is clearly in view. -
Page 6: Menu Selection
This is followed by the selected through the menu button. Press this or deselect all of the display settings. (See option for the TC7150 to scan for an RFID once to display 6 icons. detailed Settings section on P.14) tag. -
Page 7: Rfid
(complete with selecting The Hi icon enables and disables display of OK - this can be edited later in CorDEX maximum temperature within the image as a CONNECT) red spot (crosshair). This temperature will be •... -
Page 8: Settings
TC7150 – Intrinsically Safe Thermal Imaging Camera SETTINGS PARAMETERS There are 10 icons in the Settings Menu There are 5 icons in the parameters menu all allowing the user to input temperature measurement parameters to increase measurement accuracy. The Scale Icon toggles the display of the temperature colour scale. -
Page 9: Level/Span
TC7150 – Intrinsically Safe Thermal Imaging Camera LEVEL/SPAN STORING AND ANALYSING IMAGES • Two settings are fundamental to obtaining • The Image Save Button on top of the an effective thermal image, the first is clear handgrip is used to store images (except focus and the second is the correct thermal when periodic save is enabled). - Page 10 TC7150 – Intrinsically Safe Thermal Imaging Camera Certificate Information MET Listing No E113607 MET (North American) Certificate Type Class 1, Division 2 Groups B,C,D Temperature Information Measurement Range -4°F to 1112°F (-20°C to +600°C ) Accuracy ± 2°C or 2% of reading...
-
Page 11: Ten Suggestions For Thermography Best Practice
TC7150 – Intrinsically Safe Thermal Imaging Camera TEN SUGGESTIONS FOR THERMOGRAPHY BEST PRACTICE Ensure that the electrical or mechanical Observe a scene from different angles to Always store images and relate them where system you are imaging is running fully loaded... - Page 12 Copyright © 2015, CorDEX Instruments Limited. All other brand and product names are trademarks of CorDEX Instruments Limited. Ref.ID 7150, 2015 Rev.A 800.561.8187 information@itm.co www. .com...
Need help?
Do you have a question about the TC7150 and is the answer not in the manual?
Questions and answers