How To Use The Remote Controller (Sb-300) - Inter-m VHD-300 Operation Manual

How to Use the Remote Controller (SB-300)

How to Use the Remote Controller (SB-300)
- To classify the broadcasting channels of CV-300 and VHD-300/VSD-300, it uses virtual channels. The lowest
channel among VHD-300/VSD-300 device list will be allocated from the virtual channel No. 1.
※ Caution : Virtual key is classified
※ Example : If system consists in orders of CV-300, VHD-300, VSD-300, channel configuration will be as follow.
• CV-300 : channel 1~ channel 8 [No virtual channel]
• VHD-300 : channel 13 [Virtual channel: No. 1]
• VSD-300 : channel 14 [Virtual channel: No. 2]
1. BRO DC STING HD/SD /V CENTR L BRO DC STS
* When playing the CV-300 (A/V broadcast No.1 channel broadcasting of CV-300)
(Select the preferred channel among No.1 ~ No. 8 channels.)
* When playing the VHD-300 (Select with virtual channel number in the remote controller.)
*When playing the No. 2 channel of VSD-300
(Select with virtual channel number in the remote controller.)
2. STOP BRO DC STING THE /V CENTR L BRO DC ST
(Currently broadcasting channel will be stopped.)
※ Caution : Central broadcasting control is only available when the channel is being broadcasted in the
central broadcast.
with key.
HD VIDEO STREAMER
11
VHD-300